August 2014
Noise & Vibration Bulletin;Aug2014, p210
An abstract of the article "Comparison of Hanging Panels and Boundary Diffusers in a Reverberation Chamber," by D. Bradley and colleagues is presented.


Related Articles

  • An Image Based Mathematical Model for the Propagation of Fan Noise in a Plenum with Large Side Openings. Panza, Michael J. // Advances in Acoustics & Vibration;10/4/2015, Vol. 2015, p1 

    This paper presents another application of an images group model for a special enclosure geometry and source orientation. A previous work outlined the concept via application to a special tight-fitting enclosure. Application of the concept to a fan plenum requires different mathematical...

  • Investigation of field uniformity and uncertainties in reverberation chamber using nonequidistant tuner position. Song, Jian; Wang, Hang; Guo, Yong Xin // Microwave & Optical Technology Letters;May2017, Vol. 59 Issue 5, p1190 

    ABSTRACT This paper investigates the field uniformity and uncertainties in a mode-tuned reverberation chamber when nonequidistant tuner position is used. Both simulation and actual measurements have been carried out to compare the field uniformity and sample correlation between the conventional...

  • Recent Topics in Acoustic Scattering Coefficient Determination for Wall Surfaces. Sakuma, Tetsuya; Lee, Hyojin // Building Acoustics;Jun2014, Vol. 21 Issue 2, p105 

    Three recent topics in acoustic scattering coefficient determination for wall surfaces are briefly presented: 1) validation of the reverberation room method of ISO 17497-1, 2) a new method of measuring normal-incidence coefficients, and 3) alternative determination by numerical simulation....

  • An experimental study on a cylindrical microperforated panel space sound absorber. Sakagami, Kimihiro; Oshitani, Takayuki; Yairi, Motoki; Toyoda, Emi; Morimoto, Masayuki // Noise Control Engineering Journal;Jan/Feb2012, Vol. 60 Issue 1, p22 

    A microperforated panel (MPP), which is widely known as one of the most promising alternatives of the next-generation sound absorbers, is typically used with a rigid-back wall with an air-cavity. However, a multiple-leaf MPP space absorber, which does not have any backing structure, double-leaf...

  • Designing and Building an Innovative Sound Transmission Loss Facility. Kolano, Richard A. // Sound & Vibration;Jul2015, Vol. 49 Issue 7, p14 

    This article presents the design, construction, and implementation of a novel sound transmission loss testing fixture that is unique to the automotive industry. This fixture was built within a large opening in the wall between a reverberation room and an adjacent anechoic chamber. The fixture...

  • Prediction of Reverberant Properties of Enclosures via a Method Employing a Modal Representation of the Room Impulse Response. Meissner, Mirosław // Archives of Acoustics;Mar2016, Vol. 41 Issue 1, p27 

    A theoretical method has been presented to describe sound decay in enclosures and simulate the room impulse response (RIR) employed for prediction of the indoor reverberation characteristics. The method was based on a solution of wave equation with the form of a series whose time-decaying...

  • Fast measurement of antenna pattern overlap matrix in reverberation chamber. Jamaly, N.; Derneryd, A. // Electronics Letters;2/28/2013, Vol. 49 Issue 5, p1 

    Presented is a fast way for the measurement of the pattern overlap matrix in an arbitrary multi-port antenna system by a reverberation chamber. This parameter is central for calculation of the spatial correlation between different elements with arbitrary terminations. To the authors' knowledge,...

  • Guest Editorial.  // IET Science, Measurement & Technology;2015, Vol. 9 Issue 5, p533 

    An introduction to the journal is presented which discusses various articles about the field of wireless testing in reverberation chambers.

  • Measurement uncertainty of RC and its reduction techniques for OTA tests: a review. Xiaoming Chen // IET Microwaves, Antennas & Propagation;2019, Vol. 13 Issue 15, p2598 

    The emerging machine-to-machine (M2M) communications and Internet-of-things techniques bring new challenges in over-the-air (OTA) tests. The inexpensive M2M device usually aims at low-cost and low-power consumption rather than high data rate and, therefore, is usually equipped with a single...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics