TITLE

Study on the Crack Propagation Behavior of ×80 Pipeline Steel Under AC Application in High pH Solution

AUTHOR(S)
Zhu, M.; Ou, G.; Jin, H.; Du, C.; Li, X.; Liu, Z.
PUB. DATE
June 2015
SOURCE
Journal of Materials Engineering & Performance;Jun2015, Vol. 24 Issue 6, p2422
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The crack propagation behavior of pipeline steels with or without AC application was studied in high pH solution using the crack propagation experiment (cyclic load). The results show that there is a significant difference in the crack propagation behavior of steels with or without AC interference. The crack growth rate (CGR) of steel under superimposed AC is considerably greater than that without AC. AC could cause an obvious effect on the crack propagation behavior, and enhance the CGR. The crack propagation behavior of steel under AC application in high pH solution is analogous to that in near-neutral pH solution.
ACCESSION #
102778777

 

Related Articles

  • Crack growth study of dissimilar steels (Stainless - Structural) butt and overlap welded unions under cyclic load. Fuentes, Andrés L. García; del Rosario, Alberto Velásquez // Advanced Materials Research;2014, Issue 891-892, p1645 

    This study describes the mechanisms of emergence and propagation of fatigue cracks caused by mechanical tension stress fluctuations in dissimilar steels butt and overlap welded joints under axial tension fatigue loads. A structural (ASTM A537, class I) and a stainless (ASTM A240, 304L) were...

  • Fatigue Crack Retardation in LSP and SP Treated Aluminium Specimens. Hombergsmeier, Elke; Holzinger, Vitus; Heckenberger, Ulrike C. // Advanced Materials Research;2014, Issue 891-892, p986 

    Highly loaded aircraft components have to fulfill strict fatigue and damage tolerance requirements. For some components besides the crack initiation mainly the fatigue crack propagation behavior is the main design criteria. To improve the crack propagation behavior of a component several methods...

  • Calibration Function for Fatigue Crack Propagation. Glaser, B.; Gubeljak, N.; Predan, J. // Key Engineering Materials;2015, Vol. 665, p109 

    Components and structures exposed to elastic dynamic loading respond with different surface or bulk material changes which could be monitored on the through surface deformation measurements. The measurements could be performed with electronic devices used for on-line computerized measurement...

  • Numerical investigation of fatigue characteristics of concrete pavement. Maitra, Swati; Reddy, K.; Ramachandra, L. // International Journal of Fracture;Oct2014, Vol. 189 Issue 2, p181 

    In concrete pavements, fatigue is one of the major causes of distress. Repeated loads result in the formation of cracks. The propagation of these cracks cause internal progressive damage within the structure, which ultimately leads to failure of the pavement due to fatigue. This paper presents a...

  • Specific Features of Crack Propagation Under the Conditions of Static and Low-Cycle Loading. Skachkov, V.; Berezhnaya, O. // Materials Science;Jul2015, Vol. 51 Issue 1, p121 

    We study the influence of elliptic fatigue cracks of the fracture toughness of high-strength steel and the influence of static and low-cycle loading on the process of crack growth.

  • Multiaxial Fatigue Damage Prediction and Life Estimation of a Centrifugal Impeller for a Turboshaft Engine. Dileep, S.; Esakki Muthu, S.; Udayanan, P.; Mishra, R. // Journal of Failure Analysis & Prevention;Dec2015, Vol. 15 Issue 6, p883 

    The rotating gas turbine engine component such as centrifugal compressor is subjected to various static and dynamic loads during service. These service loads introduce multiaxial stress-strain states and inflict severe structural damage and hence reduce compressor efficiency and service life. In...

  • Cracks path growth in turbine blades with TBC under thermo - mechanical cyclic loadings. Sadowski, T.; Golewski, P. // Frattura e Integrita Strutturale;2016, Issue 35, p492 

    Blades of combustion turbines are extremely loaded turbojet elements, which transmit operative energy onto a rotor. Experiences of many years indicate, that cracks initiation and propagation in the blades during the operation time can cause destruction not only of the engine, but sometimes an...

  • Implementation of Fictitious Crack Model Using Contact Finite Element Method for the Crack Propagation in Concrete under Cyclic Load. Lanhao Zhao; Tianyou Yan; Xin Bai; Tongchun Li; Jing Cheng // Mathematical Problems in Engineering;2013, p1 

    The mixed freedom finite element method proposed for contact problems was extended to simulate the fracture mechanics of concrete using the fictitious crack model. Pairs of contact points were set along the potential developing path of the crack. The displacement of structure was chosen as the...

  • Quantitative characteristic of meso-damage granite under cyclic loading with different frequencies. Xiaohui Ni // Applied Mechanics & Materials;2014, Issue 630-642, p690 

    The failure damages of granite under cyclic fatigue load were caused by the propagation and coalescent of cracks at mesoscale, so it was helpful to understand the mechanical behaviours of rock by quantitatively investigating on meso-damage of granite. Stress amplitude of 10 MPa and sine wave...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics