Reduction of EMI with Chaotic Space Vector Modulation in Direct Torque Control

Asker, Mehmet Emin; Ozer, Ahmet Bedri; Kurum, Hasan
January 2016
Electronics & Electrical Engineering;2016, Vol. 22 Issue 1, p40
Academic Journal
In this paper a study is presented about the reduction of electromagnetic interference (EMI) in Direct Torque Control (DTC) method by the means of chaotic space vector modulation. Space Vector Modulated Direct Torque Control (SV-DTC) is a method developed to reduce current and moment fluctuations which stem from the hysteresis controllers used in classical DTC method. The switching frequency amplitude was changed chaotically in a Space Vector Modulated Direct Torque Control (FFSV-DTC) having a Fixed switching frequency, and Chaotic Space Vector Modulated Direct Torque Control (CAFSV-DTC) method having chaotic amplitude modulated switching frequency was obtained. CAFSV-DTC method was suggested to reduce EMI, acoustic noise and current harmonics which occur in FFSVDTC method. For this purpose, the proposed CAFSV-DTC method, using a Permanent Magnet Synchronous Motor (PMSM) drive, is compared to Random Amplitude Frequency method (RSV-DTC) and FFSV-DTC. Simulation results indicate that the proposed method yields better results.


Related Articles

  • Simulation and Analysis of Passive Torque Servo System. Chengcheng Li; Dongxiang Shao; Guanglin Wang // Key Engineering Materials;2016, Vol. 667, p493 

    Passive torque servo system (PTSS) is a key equipment in the hardware-in-the-loop experiment for the test of actuator performance. A novel mathematical model was obtained by analyzing the structure and working conditions of PTSS in this paper and the model was analyzed with the matlab software....

  • High-order terminal sliding mode control for brushless doubly-fed machines. Quankun Zhang; Yu Yu; Shuaimei lian; Hong Hu; Yujian Zhang // Applied Mechanics & Materials;2014, Issue 682-686, Special section p384 

    A novel sliding-mode variable structure(SMVS) control strategy is proposed to reduce the ripples of flux and torque of brushless double-fed machines(BDFM) based on direct torque control system. In order to ensure the constant switching frequency for the inverter, two hysteresis regulators in the...

  • Main Aspects Regarding the Screw-on Torque Diminishing when Using the Fine Pitch Screw. Creiţaru, Adrian // Petroleum - Gas University of Ploiesti Bulletin, Technical Serie;2012, Vol. 64 Issue 2, p71 

    Romanian special standards - according to international (ISO) ones - show metric threads of common use for this kind of screw elements (bolts, nuts); there are a lot of standardized and un-standardized variants and also for any mechanical threaded pieces. In usual practice, the threads are...

  • Study on the Static Load Capacity and Synthetic Vector Direct Torque Control of Brushless Doubly Fed Machines. Chaoying Xia; Xiaoxin Hou // Energies (19961073);Nov2016, Vol. 9 Issue 11, p966 

    Compared to the doubly fed machine, the brushless doubly fed machine (BDFM) has high reliability and low maintenance requirements. First, by taking the negative conjugation of the control motor variables in rotor reference frame, a state-space model of BDFM is derived. It is then transformed...

  • Control Strategy in the Flux Weakening Region of Interior Permanent Magnet Synchronous Machine used in HEV. Xiaohong Liu; Youtong Zhang // Applied Mechanics & Materials;2014, Issue 543-547, p1322 

    An new control strategy for interior permanent magnet synchronous machine (IPMSM) which is the most popular motor used in HEV is proposed and investigated, which features is increasing the reference flux weakening voltage to improve efficiency in flux weakening region. Modeling results show that...

  • Loopshaping of motor torque controller. SIEKLUCKI, GRZEGORZ // Archives of Control Sciences;Jun2013, Vol. 23 Issue 2, p213 

    The controller synthesis problem of the motor torque is presented. The tuning of the II2 controller parameters of the electromagnetic motor torque is introduced. The results are obtained by applying the weighted sensitivity method (nominal performance) which is the optimization in H∞ space....

  • Design of Robust Speed Controller by Optimization Techniques for DTC IM Drive. indurupalli, K. Mani; Anjaneyulu, K. S. R.; Prashanth, B. V. // International Journal of Computer Networks & Communications Secu;Jun2013, Vol. 1 Issue 1, p15 

    Direct Torque Control (DTC) of induction motor is preferred control strategy recently, due to its quick torque response, simplicity, less sensitivity against motor parameter variation. In general, PI speed controllers are widely used in industrial applications due to their simple structure. Due...

  • Position Sensorless Direct Torque Control of Brushless DC Motor Drive Using Four-Switch, Three Phase Inverter. Seyedi, S. M.; Halvaei Niasar, A.; Moghbelli, H. // International Review on Modelling & Simulations;Oct2012, Vol. 5 Issue 5, p2036 

    Today, cost reduction is important matter in all of the systems. In brushless dc (BLDC) motor drives, cost reduction can be achieved by elimination of three Hall Effect position sensors and reducing the number of power switches. On the other hand, in order to reduce the torque ripple, direct...

  • PERFORMANCE OF DIRECT TORQUE CONTROL IMPLEMENTED IN SPEED DRIVE. Barsoum, Nader // Global Journal of Technology & Optimization;Jun2012, Vol. 3 Issue 1, p59 

    During the last decades, the rapid development of power semiconductor devices has allowed the increased use of adjustable speed ac drives in a variety of applications, especially in the process-control industry. In many applications, the capability of controlling the speed effectively can...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics