TITLE

Analysis on the local structures for 3d1 impurities (Ti3+ and V4+) in KTiPO4

AUTHOR(S)
Ding, C. C.; Wu, S. Y.; Zhang, L. J.; Xu, Y. Q.; Zhang, Z. H.; Wu, M. H.; Teng, B. H.
PUB. DATE
January 2018
SOURCE
Magnetic Resonance in Chemistry;Jan2018, Vol. 56 Issue 1, p25
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Making use of the perturbation formulae for 3d1 ions (Ti3+ and V4+) under orthorhombically compressed octahedra, the spin Hamiltonian parameters (g factors: gx, gy, gz and hyperfine structure constants: Ax, Ay, Az) and local structures of the 3d1 impurity centres C1, C2, and C3 in KTiOPO4 crystals are theoretically analyzed in a consistent way. The remarkable local distortions (i.e., the relative axial compression ratios 11.2%, 7.0%, and 5.5% along Z axis and the relative planar bond length variation ratios 15.9%, 7.0%, and 6.0%) are obtained for the [Ti2O6]9− cluster on Ti2 site and [VO6]8− clusters on Ti1 and Ti2 sites, respectively, in view of the Jahn-Teller effect. The above local orthorhombic distortion parameters in the impurity centres are found to be more significant than the host Ti1 and Ti2 sites in pure KTiOPO4. The sequences (C1 > C2 > C3) of the local orthorhombic distortion parameters ρ and τ are in accordance with those of the axial and perpendicular anisotropies Δg and δg of g factors, respectively.
ACCESSION #
126587066

 

Related Articles

  • Microbubble skin friction reduction on an axisymmetric body under the influence of applied axial pressure gradients. Clark, H.; Deutsch, S. // Physics of Fluids A;Dec91, Vol. 3 Issue 12, p2948 

    The influence of both a favorable and an adverse applied axial pressure gradient on microbubble-induced skin friction reduction was examined. An 87 mm diameter, 632 mm long model equipped with a 273 mm long cylindrical force balance was employed. Experiments were carried out in a 305 mm diameter...

  • No rise in compressor sales for two years.  // Professional Engineering;11/03/99, Vol. 12 Issue 20, p12 

    Predicts the continuation of the downward trend in compressor sales in Great Britain. Decline of engineering output in 1999; Anticipated rate of depression of demand for axial compressors.

  • Development of key components and technologies for a high repetition rate and high-power excimer laser Goto, Tatsumi; Takagi, Shigeyuki; Kakizaki, Kouji; Saton, Saburoh; Kosugi, Shinichiro; Ohishi, Takashi; Kanazawa, Yukio; Ishii, Akira; Teranishi, Tsuneharu; Yasuoka, Koichi; Shinohe, Takashi; Ohashi, Hiromichi; Endo, Fumihiko; Okamura, Katsuya // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p1 

    Develops the key components and technologies for a xenon chloride excimer laser. Fabrication of a compact axial blower; Creation of x-ray tube for laser preionization.

  • Packaged engines teach real IC technology.  // Professional Engineering;11/29/2000, Vol. 13 Issue 22, p56 

    Introduces a miniature axial-flow gas turbine with test stand from Armfield. Chance for universities and researchers to use packaged engines in the teaching of integrated circuit engine design and manufacture; Measurement of cylinder pressures and temperatures in real-time.

  • Inertial Manifolds and Gevrey Regularity for the Moore-Greitzer Model of an Axial-Flow Compressor. Chung, Y.; Titi, E. S. // Journal of Nonlinear Science;Jan/Feb2003, Vol. 13 Issue 1, p1 

    Studies inertial manifolds and Gevrey regularity for the Moore-Greitzer model of an axial-flow compressor. Global invariant inertial manifold in the system of evolution equations; Ordinary differential system; Reliability of the Galerkin method.

  • Expanded Triaxial Force.  // Product Design & Development;Jul/Aug2010, Vol. 65 Issue 6, p33 

    The article evaluates the 3-component triaxial force link with expanded measurement capabilities from Kistler Instrument Corp.

  • Behaviour of Silos Supported on Discrete Brackets. Gillie, M.; Holst, J. M. F. G.; Münch, M.; Rotter, J. M. // International Journal of Structural Stability & Dynamics;Mar2002, Vol. 2 Issue 1, p45 

    The controlling design condition in thin metal silos is generally buckling under axial compression. This compression is often assumed to be uniform but in many practical cases several failure modes interact as a result of a rather more complex pattern of stresses. Small silos are often supported...

  • Experimental study of axial flow in a vortex ring. Naitoh, Takashi; Fukuda, Naohiko; Gotoh, Toshiyuki; Yamada, Hideo; Nakajima, Kei // Physics of Fluids;Jan2002, Vol. 14 Issue 1, p143 

    For a vortex ring at Re=1600, it was found that two types of azimuthal flow (axial flow) exist inside the vortex tube. The axial flow appears when the amplitude of a wavy deformation of the vortex ring becomes appreciable. The axial flow starts to grow before the wave-breaking and its speed...

  • Stall prediction of in-flight compressor due to flamming of refueling leakage near inlet. Liu, N.; Ng, E. Y.-K.; Lim, H. N.; Tan, T. L. // Computational Mechanics;Apr2003, Vol. 30 Issue 5/6, p479 

    The propagation of strong distortion at inlet of an axial compressor is investigated by applying the critical distortion line and the integral method. The practical applications, such as the inlet conditions of flaming of leakage fuel during mid-air refueling process, are implemented to show the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics