TITLE

Analysis of Concrete-Filled Square Steel Tube Short Columns under Eccentric Loading

AUTHOR(S)
Shan, Qifeng; Cai, Jingming; Li, Xiaopeng; Tan, Jiawei
PUB. DATE
June 2019
SOURCE
Mathematical Problems in Engineering;6/20/2019, p1
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The concrete-filled square steel tube (CFSST) columns have been widely applied in structural engineering. Although many constitutive models have been proposed to describe CFSST short columns under concentric loading, the applicability of the existing concentric model in the analysis of CFSST short columns under eccentric loading has not been properly verified. In this paper, the eccentric behaviors of CFSST short columns were investigated with the software of ABAQUS/standard. It was found that the contact stress between steel tube and inner concrete was seriously affected by eccentric ratios, indicating that the confinement effect of steel tube on inner concrete was different under concentric and eccentric loading. In this paper, a new stress-strain model of inner concrete which considered the influence of eccentricity was developed and verified with existing experimental results. It was found that the proposed stress-strain model was more accurate in simulating the eccentric behaviors of CFSST short columns.
ACCESSION #
137087987

 

Related Articles

  • Bearing capacity of fastener steel tube full hall scaffolds. Lu, Z.; Chao, G. // Magazine of Civil Engineering;2019, Vol. 87 Issue 3, p35 

    In fastener steel tube full hall scaffolds (FSTFHSs), the upper load is transferred to the posts through the top horizontal tubes. Further, the posts and horizontal tubes are not always in the same plane owing to the eccentricity of the coupler connections. Moreover, building materials and...

  • Study on compressive bearing capacity of concrete-filled square steel tube column reinforced by circular steel tube inside. Zhang, Yufen; Zhao, Junhai; Yuan, Weifeng // Journal of Civil Engineering & Management;2013, Vol. 19 Issue 6, p787 

    This paper concentrates on the compressive bearing capacity of one composite column of a Concrete-Filled Square Steel Tube (CFSST) reinforced by a circular steel tube inside. Some tests were conducted to consider the compression behaviour of the stub columns under axial compressive loading....

  • Properties of Recycled Aggregate Concrete Filled Steel Tubes. Yijie Huang; Huangsheng Sun // Advanced Materials Research;2014, Vol. 1065-1069, p1323 

    A review on the properties of recycled aggregate concrete filled steel tubes (RACSFT) was presented, followed by the short overview on the related researches. The uniaxial mechanical behavior, flexural performance, creep performance as well as eccentric loaded behavior of RACSFT specimens were...

  • Elliptical FRP-Concrete-Steel Double-Skin Tubular Columns under Monotonic Axial Compression. Zhang, Bing; Feng, Gui-Sen; Wang, Yan-Lei; Lai, Cong-Cong; Wang, Chen-Chen; Hu, Xia-Min // Advances in Polymer Technology;1/24/2020, p1 

    Hybrid FRP-concrete-steel double-skin tubular columns (hybrid DSTCs) are a novel form of hollow columns consisting of an outer FRP tube, an inner steel tube, and an annular layer of concrete between the two tubes. Due to the effective confinement of the two tubes, the concrete in hybrid DSTCs is...

  • Research on the Bond Behavior of Preplaced Aggregate Concrete-Filled Steel Tube Columns. Lv, Jing; Zhou, Tianhua; Du, Qiang; Li, Kunlun; Jin, Liangwei // Materials (1996-1944);2020, Vol. 13 Issue 2, p300 

    In order to investigate the bond behavior of preplaced aggregate concrete-filled steel tube (CFT-PAC) columns and the difference of bond behavior between CFT-PAC columns and normal concrete-filled steel tube (CFT-NC) columns, a total of 11 columns were prepared and the push-out tests were...

  • Temperature Field Calculation and Analysis within Steel Tube Reinforced Columns. Lei Xu; Jiangang Sun // Open Civil Engineering Journal;2012, Vol. 6, p15 

    The temperature field analysis method of steel tube reinforced columns under fire by finite element analysis software ABAQUS is proposed in this paper. The theoretical method is validated by tests, and the calculated results agree well with those of tests. On the basis of that, the influencing...

  • Behavior of FRP-Confined Concrete-Filled Steel Tube Columns. Yiyan Lu; Na Li; Shan Li // Polymers (20734360);May2014, Vol. 6 Issue 5, p1333 

    This paper presents the results of an experimental study into the behavior of concrete-filled steel tube columns confined by fiber-reinforced polymer (FRP). Eleven columns were tested to investigate the effects of the FRP layer number, the thickness of the steel tube and concrete strength on...

  • Measurement Analysis of Mechanical Properties of Round-ended Concrete Filled Steel Tube Coupled Tower Column during Construction Phase. Wenfeng Chen; Bin Li; Yan Li // Applied Mechanics & Materials;2014, Issue 630-642, p140 

    Steel-concrete composite structures are widely used in large-span spatial structures, high-rise building, super high-rise building and bridges and so on thanks to its advantages in terms of mechanical and construction properties. And the corresponding design codes on circular, square and...

  • Finite Element Analysis On Concrete-filled Square Steel Tube Short Columns with Inner CFRP Profiles under Axial Compression. Guochang Li; Bing Zhou; Jinghua Pan // Applied Mechanics & Materials;2014, Issue 578-579, p335 

    The new composite structure concrete-filled square steel tube (CFST) column with inner CFRP profiles is proposed. A finite element model is presented to investigate the mechanical behavior of CFST short columns with internal CFRP profiles subjected to axial compression using ABAQUS based on...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics