TITLE

MATRIX CONVERTER FOR GRID CONNECTED PERMANENT MAGNET SYNCHRONOUS GENERATOR

AUTHOR(S)
PRAKASH, N.; RAJ, C. SIVAN
PUB. DATE
April 2019
SOURCE
Oxidation Communications;2019, Vol. 42 Issue 2, p249
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Out of all renewable energy sources, wind energy seems to be prominent and quite promising for electric power generation. Wind energy conversion system (WECS) has been found to be economic, compared to the cost of fossil fuels which are rising at a much faster rate. Therefore, the research of WECS has regained importance, as they are particularly suitable for wind power plants. This thesis presents the modelling and simulation of variable speed wind turbine driven Permanent magnet synchronous generator (PMSG) connected to grid through Matrix converter (MC). MC is used to convert three phase Alternating current (AC) variable frequency variable rotor voltages into constant frequency AC voltage. Modelling of PMSG is done using its dynamic equations and then MC is integrated for the direct conversion to constant frequency, variable voltage output. The simulation of a 1hp PMSG-based Grid Connected Wind Energy Conversion System (GCWECS) is carried out using MATLAB/SIMULINK. Thus by using the single stage conversion the harmonics produced in the WECS is considerably reduced. By proper switching of MC, the output frequency of the PMSG in grid side is 50 Hz and the voltage is constant even the input is variable frequencies.
ACCESSION #
137257471

 

Related Articles

  • Spare parts management algorithm for wind farms using structural reliability model and production estimation. Mani, Sajjad; Oraee, Ashknaz; Oraee, Hashem // IET Renewable Power Generation;2016, Vol. 10 Issue 7, p1041 

    Doubly fed induction generators (DFIGs) are widely used in wind power systems; hence their reliability model is an important consideration for production assessment and economic analysis of wind energy conversion systems. However, to date mutual influences of reliability analysis, production...

  • How Much Is Too Much? Wolf, Gene // Transmission & Distribution World;Aug2014 Supplement Renewables, p1 

    In this article, the author focuses on the use of renewable energy and also highlights his experience of working with wind farm projects. Topics discussed include easy monitoring of wind farms through computer, increased demand of photovoltaic (PV) technology, a method of generating electric...

  • News.  // Engineering & Technology (17509637);7/5/2008, Vol. 3 Issue 12, p4 

    (11 pages)

  • WIND POWER NOW! Rittenhouse Inglis, David // Bulletin of the Atomic Scientists;Oct1975, Vol. 31 Issue 8, p20 

    The article features a discussion on wind power. Wind power does not require further research and development before initial large-scale deployment unlike other solar-related processes. Wind power generating electricity on a large scale could contribute substantially to the national energy...

  • Effect of wind speed and load power factor variation on optimal sizing of the machine and converters for double output induction generator based stand-alone wind energy conversion systems. Saha, T. K.; Bagarty, D. P.; Kastha, D. // Journal of Renewable & Sustainable Energy;Jan2009, Vol. 1 Issue 1, p013104 

    In this paper, an algorithm for finding out the optimal ratings of the machine and power electronic converters of a wind turbine driven stand-alone double output induction generator based variable speed constant frequency generation system is reported, which seeks to minimize the cost of energy...

  • Application of STATCOM to Enhance the Power Quality of Grid Containing Induction Generator Based Wind Farm. Zala, Mahavir; Jadhav, H. T.; Roy, Ranjit // International Journal on Recent Trends in Engineering & Technolo;Mar2011, Vol. 5 Issue 3, p26 

    Due to large power demand and environmental issues, electrical power generation from renewable energy sources is receiving more attention. Wind energy generation systems are being integrated to power networks worldwide in increasing numbers. The power system is therefore facing new challenges...

  • POWER QUALITY AND RELIABILITY ISSUES OF INDUCTION GENERATOR FOR WIND POWER PLANTS. Shakya, Jitendra Singh; Saket, R. K.; Singh, Gurmit // International Journal of Research & Reviews in Applied Sciences;2012, Vol. 11 Issue 3, p546 

    Induction generators connected to the local grid may lead to severe power quality problems such as flicker, voltage dip etc. Further, unbalancing of the supply system may distort the supply voltage at the point of common coupling (PCC). The power quality and reliability issues of an induction...

  • Experimental behaviour analysis for optimally controlled standalone DFIG system. Soued, Salah; Chabani, Mohammed Saci; Becherif, Mohamed; Benchouia, Mouhamed Toufik; Ramadan, Haitham Saad; Betka, Achour; Golea, Amar; Zouzou, Salah Eddine // IET Electric Power Applications;2019, Vol. 13 Issue 10, p1462 

    Metaheuristic optimisation techniques such as the Grey Wolf optimiser (GWO) and artificial bee colony (ABC) algorithms have been developed for enhancing the dynamic behaviour of wind energy conversion system. The stand-alone doubly fed induction generator (DFIG) control system based on the...

  • PMSG-based VS-WECS for constant active power delivery to standalone load using direct matrix converter-based SST with BESS. Ahmed, Haris; Bhattacharya, Avik // IET Generation, Transmission & Distribution;2019, Vol. 13 Issue 10, p1757 

    This study presents a simplified control algorithm for constant active power delivery to a weak-grid/standalone load from a variable speed-wind energy conversion system (VS-WECS). The proposed system consists of a permanent magnet synchronous generator (PMSG)-based WECS connected to a...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics