TITLE

Methods of Evaluating the Corrosion Resistance of Low-Alloy and Carbon Tube Steels under the Service Conditions of Oil and Gas Pipelines

AUTHOR(S)
Rodionova, I.; Baklanova, O.; Shapovalov, E.; Endel', N.; Reformatskaya, I.; Podobaev, A.; Zinchenko, S.; Efimov, S.; Kuznetsova, E.; Malyshkina, L.; Drandusov, A.
PUB. DATE
May 2005
SOURCE
Metallurgist;May2005, Vol. 49 Issue 5/6, p173
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
At present, determining the content of corrosion-active nonmetallic inclusions in tube steels is the best way to evaluate these steels' resistance to local corrosion under the service conditions of oil-field tubing in Western Siberia. However, the method needs to be refined or supplemented. Field tests of tube steels are an important means of gauging the corrosion resistance of these materials and pipes when certain conditions are observed. Laboratory corrosion tests should be performed under conditions identical to the corrosion conditions encountered in the field. The rates of the main corrosion processes that take place during the problem-free operation of pipelines may turn out to be significantly higher in the laboratory than in field tests.
ACCESSION #
18439044

 

Related Articles

  • On the Local Inner Corrosion of Oil and Gas Pipelines in the West-Siberian Fields and Its Prevention. Gonik, A. A. // Protection of Metals;Sep2005, Vol. 41 Issue 5, p487 

    The sources of corrosion grooving of inner surface of pipes in the West-Siberian oil and gas pipelines is analyzed. A possible way of preventing this local corrosion is to hydraulically increase the aggregative stability of the pumped-through emulsion. For this purpose, stratal water should be...

  • Investigation on Preferential Corrosion of Welded Carbon Steel Under Flowing Conditions by EIS. Alawadhi, K.; Aloraier, A.; Joshi, S.; Alsarraf, J.; Swilem, S. // Journal of Materials Engineering & Performance;Aug2013, Vol. 22 Issue 8, p2403 

    Carbon steels are used extensively in construction of oil and gas pipes but they exhibit poor corrosion-resistance properties because of internal corrosion. In this research, a rotating cylinder electrode apparatus was designed so that electrodes machined from the weld metal, heat-affected zone,...

  • The Effect of Nonmetal Inclusions and Microstructure on Local Corrosion of Carbon and Low-alloyed Steels. Reformatskaya, I. I.; Rodionova, I. G.; Beilin, Yu. A.; Nisel'son, L. A.; Podobaev, A. N. // Protection of Metals;Sep/Oct2004, Vol. 40 Issue 5, p447 

    The resistance of carbon and low-alloyed steels to local corrosion is shown to be directly determined by their phase-structure, rather than chemical, composition. A correlation between the presence of various nonmetal inclusions in steels and the local corrosion rate is revealed. Inclusions...

  • Effect of chemical composition and structure on the resistance of oil pipelines to carbon dioxide corrosion. Ioffe, A. V.; Vyboishchik, M. A.; Trifonova, E. A.; Suvorov, P. V. // Metal Science & Heat Treatment;Jul2010, Vol. 52 Issue 1/2, p46 

    The mechanism of the influence of alloying of pipe steels with chromium and molybdenum on the development of carbon dioxide corrosion in oil pipelines is described. Corrosion products considerably enriched with alloying elements hinder contact between the metal and the corrosive medium.

  • Pipeline Managers Discuss Pressures of Corrosion Control.  // Pipeline & Gas Journal;Oct2000, Vol. 227 Issue 10, p28 

    Presents a roundtable discussion among United States oil, gas and natural gas pipeline managers on the future of corrosion control in the pipeline industry. Compliance with federal pipeline safety regulations; Adoption of long-term, corrosion-prevention measures; Pressures of corrosion control.

  • Nanotechnologies Address Pipe Corrosion.  // Products Finishing;Mar2013, Vol. 77 Issue 6, p22 

    The article focuses on the application of the nanotechnology for addressing the problems associated with the corrosion under insulation (CUI). It mentions that oil, gas and refineries of the U.S. use CUI to reduce corrosion on the surfaces of pipes. It further highlights that the finding of a...

  • CORROSION INHIBITION OF LOW-CARBON STEEL IN ACID AND NEUTRAL MEDIA. PLOTNIKOVA, M. D.; SHEIN, A. B. // Izvestiya Vysshikh Uchebnykh Zavedenii. Seriya Khimiya i Khimich;2013, Vol. 56 Issue 3, p121 

    The results of investigation of influence of some inhibitive compositions on electrochemical and corrosion behavior of steel St3 in acidic and neutral media by means of weight-loss, polarization and impedance methods are presented. Impedance spectra were described by equivalent circuits taking...

  • Adsorption and Computational Studies for Evaluating the Behavior of Silicon Based Compounds as Novel Corrosion Inhibitors of Carbon Steel Surfaces in Acidic Media. Abbas, Mohamed A.; Bedair, Mahmoud A. // Zeitschrift für Physikalische Chemie;Feb2019, Vol. 233 Issue 2, p225 

    Two organo-silicon compounds namely; di-triethanolamine siloxane and bis (dithioamine triethanolamine) siloxane were employed as inhibitors for C-steel alloys corrosion in 1 M H2SO4 solution utilizing potentiodynamic polarization, electrochemical impedance and computational studies. According to...

  • Case study: Corrosion Behavior of Constructive Alloys in Linear Alpha Olefin Environment. Amin, Mohammed A.; Mohsen, Q.; Mostafa, Nasser Y.; El-Bagoury, Nader; Al-Refaie, Abdullah; Bairamov, Avtandil K.; Al-Maaesab, Saad; Morales Murillo, Esteban; Saad Ayed Al-Qahtani // International Journal of Electrochemical Science;May2014, Vol. 9 Issue 5, p2631 

    During initial days of α-SABLIN (LAO's) commercial plant operation, general corrosion was observed in the downstream separation columns. This was due to traces of catalyst not being completely neutralized thus forming acidic medium (mainly hydrochloric), resulting in the corrosion of the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics