Saving The Longest For Last: Big Warrior Selects Big Rig For Gas Pipeline Installation

December 2005
Underground Construction;Dec2005, Vol. 60 Issue 12, p46
Trade Publication
The article focuses on Big Warrior Corp.'s use of the horizontal directional drilling machine Vermeer Navigator D200x300 in the installation of a 12-inch natural gas transmission line spanning 2,000 feet in solid rock. The company was hired by AGL Resources Inc. to complete a five-mile steel replacement project. To maintain the integrity of its natural gas pipelines, AGL Resources surveyed and replaced all of its bare steel pipes with epoxy-coated pipes to prevent corrosion.


Related Articles

  • Effects of Hydrogen on the Corrosion Failure of Welded Pipelines. Makarenko, V.; Khalin, A. // Chemical & Petroleum Engineering;Jul/Aug2005, Vol. 41 Issue 7/8, p448 

    Test data are presented for specimens of steels 20, 09G2S, and 14Kh2GMR provided by a method corresponding to the standard NACE TM-01-77. It is found that the work of failure as a time function is related to the hydrogenation volume.

  • Stray-Current Corrosion Criteria for Underground Steel Pipelines. Freiman, L.I. // Protection of Metals;Mar/Apr2003, Vol. 39 Issue 2, p172 

    An electrochemical approach to the choice of criteria for dangerous corrosion effects of stray currents on underground steel pipelines is present.

  • New Alternatives in Corrosion Protection for Steel Pipelines. Stephens, Byron // Pipeline & Gas Journal;Jul2004, Vol. 231 Issue 7, p79 

    Reports on the corrosion protection products offered by SHAIC International for steel pipelines for the oil, gas and water industries. Specialization of the company in heat shrinkable products for protection of girth welds and steel fittings.

  • Effect of Age of Pipes on Performance of Natural Gas Transmission Pipeline Network System. Woldeyohannes, A. D.; Majid, M. A. A. // Journal of Applied Sciences;2011, Vol. 11 Issue 9, p1612 

    No abstract available.

  • Effect of chemical composition and structure on the resistance of oil pipelines to carbon dioxide corrosion. Ioffe, A. V.; Vyboishchik, M. A.; Trifonova, E. A.; Suvorov, P. V. // Metal Science & Heat Treatment;Jul2010, Vol. 52 Issue 1/2, p46 

    The mechanism of the influence of alloying of pipe steels with chromium and molybdenum on the development of carbon dioxide corrosion in oil pipelines is described. Corrosion products considerably enriched with alloying elements hinder contact between the metal and the corrosive medium.

  • Corrosion of API X70 Steel Due to Near Shore Sediment. Budiea, A. M. A.; Yahaya, N.; Nor, N. M. // International Journal of Civil & Environmental Engineering;Jun2012, Vol. 12 Issue 3, p84 

    Pipelines those have been buried under seabed sediment are at risk of corrosion due to the corrosiveness of this particular environment. Hereby, corrosion experimental study has been conducted to highlight the importance of near shore sediment as an aggressive environment towards steel...

  • FLAW SIZING IN PIPES USING LONG-RANGE GUIDED WAVE TESTING. Sanderson, R. M.; Catton, P. P. // AIP Conference Proceedings;6/23/2011, Vol. 1335 Issue 1, p689 

    The absence of adequate inspection data from difficult-to-access areas on pipelines, such as cased-road crossings, makes determination of fitness for continued service and compliance with increasingly stringent regulatory requirements problematic. Screening for corrosion using long-range guided...

  • What's New In Trenchless Tools and Equipment.  // Pipeline & Gas Journal;May2002, Vol. 229 Issue 5, p39 

    Introduces equipment and supplies for pipeline operations. Features of the self-contained directional drill from American Augers; Products offered by Metrotech; Function of the Four Hole Hammer piercing tools from McLaughlin Manufacturing.

  • Infrared thermography for high-temperature pressure pipe. Gongtian Shen; Tao Li // Insight: Non-Destructive Testing & Condition Monitoring;Mar2007, Vol. 49 Issue 3, p151 

    High-temperature pressure pipelines are extensively used in petrochemical plant and power stations. Severe pits or wall loss defects can be internally produced after a certain period of time due to media corrosion and cavitation erosion. These defects finally lead to leakage of the pipes. In...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics