TITLE

Innovation in Removing and Recovering Wax from Wax Printed Fabric

AUTHOR(S)
Sun Li; Wang Wei; Chen Shui-Lin
PUB. DATE
February 2006
SOURCE
AATCC Review;Feb2006, Vol. 6 Issue 2, p29
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The article examines wax recovery in wax printing factories using the dewaxing trough. A dewaxing trough to remove and recover wax from the wax printed fabric is illustrated. The wax printed fabric is guided into the dewaxing trough full hot water and by a feed roller. The dewaxing trough is divided into dewaxing and clear zones by partition plates to prevent slurry from floating toward the clear zones. Certain dewaxing parameters play an important role in determining the extent of dewaxing. The dewaxing trough is being designed and the process will be put into service at certain factories in China.
ACCESSION #
20235625

 

Related Articles

  • AN ANALYTICAL MODEL FOR OPTIMAL DISASSEMBLY. Ying Tang // Proceedings for the Northeast Region Decision Sciences Institute;2008, p546 

    To ease in the disassembly procedure of discarded products, this paper describes an analytical model of a Disassembly Petri net (DPN) in conjunction with a Hybrid Bayesian network (HBN), for optimal disassembly planning. The DPN models all feasible disassembly steps along with the necessary...

  • A systematic approach for automatic assembly sequence plan generation. Lai, Hsin-Yi; Huang, Chin-Tzwu // International Journal of Advanced Manufacturing Technology;Nov2004, Vol. 24 Issue 9/10, p752 

    This paper presents a systematic approach for automatic assembly sequence plan generation (ASPG) by using an integrated framework of the part liaison matrix and precedence Boolean relations. The objective of this study is to propose a unified and integrated mathematical representation,...

  • Two-sided assembly line balancing using an ant-colony-based heuristic. Baykasoglu, Adil; Dereli, Türkay // International Journal of Advanced Manufacturing Technology;Mar2008, Vol. 36 Issue 5/6, p582 

    Two-sided assembly line balancing (ALB) problems usually occur in plants which are producing large-sized high-volume products, such as buses, trucks, and domestic products. Many algorithms and heuristics have been proposed to balance the well known classical one-sided assembly lines. However,...

  • Automatic Identification. Weatherall, David // Management Services;Jul1987, Vol. 31 Issue 7, p34 

    This article focuses on automatic identification which is rapidly gaining ground in the manufacturing industries. The push of manufacturing economics is forcing manufacturers the world over to create assembly lines that can produce a mixture of goods. Naturally, each of the items on the assembly...

  • BIONIC ASSEMBLY SYSTEM: QUEUING. TECHNOLOGY MATRIX AND LIFE FILE. BERGER, Franz; LAENGAUER, Christoph; HORNUNG, Johann; HAMILTON, Peter; DOLEZAL, Christian; ZEITLINGER, Raoul; CESAREC, Paulina // Annals of DAAAM & Proceedings;Jan2009, p21 

    This paper describes an idea for an evolutionary assembly system. The idea is based on bionic behavior and leads to a factory model that is working very target orientated. The basic framework for the factory model is summarized.

  • Optimum assembly line balancing by minimizing balancing loss and a range based measure for system loss. Roy, Dilip; Khan, Debdip // Management Science Letters;2011, Vol. 1 Issue 1, p13 

    An assembly line is a sequence of workstations, connected together by a material handling system, which is used to assemble components into a final product. The economic importance of assembly as a manufacturing process has led to extensive efforts for designing an assembly line to ensure...

  • Boeing inaugurates moving assembly line for 777.  // Interavia Business & Technology;Winter2006, Issue 686, p4 

    The article reports that Boeing Co. has started using a moving assembly line for the first time to build its 777 jetliner in the later part of 2006. Moving assembly line is used only during final assembly positions for the airplane, moving it at 1.6 inches per minute during production. Earlier...

  • Optimizing Parts Bin Layout. Weber, Austin // Assembly;May2013, Vol. 56 Issue 5, p48 

    The article focuses on optimizing the layout for part bins that contains automobile manufacturing parts such as fasteners, nuts and other parts to increase the production of a manufacturing facility. It states that bins can be placed anywhere at the workstation or assembly lines bit it should be...

  • APPLICATION OF ASSEMBLY LINE BALANCING HEURISTICS TO DESIGNING PRODUCT LAYOUT IN MOTOR MANUFACTURING OPERATIONS. UBANI, E. C. // Interdisciplinary Journal of Contemporary Research in Business;Oct2012, Vol. 4 Issue 6, p1297 

    This study suggests and considers the application of assembly line balancing heuristics to designing a product layout for automobile assembly to provide a platform for high utilization of labour and equipment, which is necessary for scheduled completion of motor manufacturing processes in...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics