Control Environment of Linear Induction Drive Dynamics Models

Rinkevičienė, R.; Lisauskas, S.
December 2007
Electronics & Electrical Engineering;2007, Issue 80, p63
Academic Journal
Developed dynamic models of linear induction drives allow examining various dynamic characteristics of linear induction drives according to results of simulation. Nevertheless, changes in motor windings connection way or motor parameters require recalculating and renewing set up of model parameters. The integrated control environmental of model is discussed. Developed software allows controlling model and investigating non-symmetrical modes of single phase breaking and breaking by direct current, compare obtained characteristics and examine influence of motor parameters on that. Active program window is presented, where the motor parameters, winding connection way, operation mode and desired simulation results can be set up. Algorithm of simulation program and algorithm for processing of simulation results are presented. Breaking time dependence on the resistance of the secondary element has minimum value. Presented dependence of breaking time against resistance of the secondary element and the breaking voltage allows choosing these parameters for obtaining of desirable braking time.


Related Articles

  • A Dynamic Model of Air Pollution, Health, and Population Growth Using System Dynamics: A Study on Tehran-Iran (With Computer Simulation by the Software Vensim). Shahgholian, Keyvan; Hajihosseini, Hamid // World Academy of Science, Engineering & Technology;Nov2009, Issue 35, p245 

    The significance of environmental protection is well-known in today's world. The execution of any program depends on sufficient knowledge and required familiarity with environment and its pollutants. Taking advantage of a systematic method, as a new science, in environmental planning can solve...

  • Crash testing for dummies.  // Automotive Engineer;Dec2005, Vol. 30 Issue 11, p34 

    The article the TNO Automotive Safety Solutions has launched the Mathematical Dynamic Modelling (MADYMO) /Exchange. This new software tool enables users to harness the power of some of the most effective crash test simulation software available. MADYMO software allows users to create virtual...

  • A Model for Estimating the Potential Biomagnification of Chemicals in a Generic Food Web: Preliminary Development. Alonso, Elena; Tapie, Nathalie; Budzinski, Hélëne; Leménach, Karyn; Peluhet, Laurent; Tarazona, José V. // Environmental Science & Pollution Research;Jan2008, Vol. 15 Issue 1, p31 

    The article presents a study on a conceptual method for calculating the biomagnification potential in a generic food web, which was mathematically implemented through system dynamic models created under data sheet software. Results showed that the mathematical implementation of the conceptual...

  • Optimal Capacitor Placement in a Radial Distribution System using Plant Growth Simulation Algorithm. Rao, R. Srinivasa; Narasimham, S. V. L. // Proceedings of World Academy of Science: Engineering & Technolog;Nov2008, Vol. 47, p716 

    This paper presents a new and efficient approach for capacitor placement in radial distribution systems that determine the optimal locations and size of capacitor with an objective of improving the voltage profile and reduction of power loss. The solution methodology has two parts: in part one...

  • Tracking Formant Trajectory of Tracheoesophageal Speech Using Hidden Dynamic Model. Feng Xue; Gang Lv // Computer & Information Science;2011, Vol. 4 Issue 1, p110 

    In this study, a method of tracking the formant trajectory of Tracheoesophageal (TE) speech using the Hidden Dynamic Model (HDM) with dynamic target orientation was put forward based on the characteristics of TE speech. At first, a PIF-LPC algorithm was used to extract the formant parameters of...

  • Comparative analysis of lightning overvoltages in distribution lines on the ground of laboratory tests and measurements. SKOMUDEK, W. // Materials Science (0137-1339);2009 Part 1 of 2, Vol. 27 Issue 4, p1147 

    Determination of extreme voltages induced on overhead and cable power lines by nearby lightning strokes is a complex problem. Results of computer simulation (laboratory tests) and measurements of such overvoltage processes due to lightning discharges occurring in overhead and cable lines, as...

  • Rudder Based Roll Control via host-computer of A Robotic Boat. Xinping Bao; Zhenyu Yu; Nonam, Kenzo // International Journal of Advanced Robotic Systems;Mar2009, Vol. 6 Issue 1, p43 

    Rudder based roll control of a small-sized robotic boat is a key technique for the devices on board to achieve good performance. This paper introduces a host-based robotic boat capable of performing basic movement operations. The course keeping and roll reduction are studied via rudder based...

  • The Parameter's Effect on the Stability in Microbial Growth Model. Hong Men; Yuhong Li; Fangbao Tian // Journal of Computers;May2010, Vol. 5 Issue 5, p741 

    A nonlinear dynamic growth model of microorganisms is developed by considering the chemotaxis, the diffusion, and the pH value based on the theories of the diffusion reaction of thermodynamics and the chemotactic reaction of biology in this paper. The stability of the model is studied by...

  • DINAMIKA PROCESA UÄŒENJA UZ POMOĆ KIBERNETIÄŒKIH SUSTAVA. Munitić, Ante; Ristov, Pančo; Beran, Ivona Milić // Nase More;2009, Vol. 56 Issue 3/4, p118 

    The application of system dynamics modeling, i.e. system dynamics in western developed countries started to be used for simulation most complex systems 35 years ago. The first degree essays of marine systems processes models mentored by Ante Munitić PhD appeared at the faculty of Split...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics