TITLE

Packaged engines teach real IC technology

PUB. DATE
November 2000
SOURCE
Professional Engineering;11/29/2000, Vol. 13 Issue 22, p56
SOURCE TYPE
Trade Publication
DOC. TYPE
Article
ABSTRACT
Introduces a miniature axial-flow gas turbine with test stand from Armfield. Chance for universities and researchers to use packaged engines in the teaching of integrated circuit engine design and manufacture; Measurement of cylinder pressures and temperatures in real-time.
ACCESSION #
3945616

 

Related Articles

  • Adding value, layer by layer. Mortimer, John // Professional Engineering;Mar2012, Vol. 25 Issue 3, p51 

    The article offers information on the unveil of a new manufacturing technology developed by engineers of Bladon Jets engineering center in Coventry, England to produce micro gas turbines. The technology has been developed to generate sets and hybrid electric cars and vans. The design for...

  • Axial flow compressor issues.  // Modern Power Systems;Dec2008, Vol. 28 Issue 12, p26 

    The article discusses the problem areas of axial flow compressors in advanced gas turbines. It notes that gas turbines that are utilized in mixed cycle power plants works at high pressure ratios and turbine firing temperatures where compressor pressure ratio can lead to very narrow operation...

  • Flow and Performance Calculations of Axial Compressor near Stall Margin. Yoojun Hwang; Shin-Hyoung Kang // AIP Conference Proceedings;6/28/2010, Vol. 1225 Issue 1, p605 

    Three-dimensional flows through a Low Speed Research Axial Compressor were numerically conducted in order to estimate the performance through unsteady and steady-state simulations. The first stage with the inlet guide vane was investigated at the design point to confirm that the rotor blade...

  • Reducing Gas Turbine Emissions. Kapoor, Rajat; Kaufman, Keith C. // Pollution Engineering;Oct2006, Vol. 38 Issue 10, p24 

    The article discusses the revised design on the efficiency of gas turbine emissions of CO2 and reduces generation of NOx in California. Changes are established after engineers from Vogt Power International Inc. have determined that the gas velocity from the turbine was unequally distributed...

  • Microbubble skin friction reduction on an axisymmetric body under the influence of applied axial pressure gradients. Clark, H.; Deutsch, S. // Physics of Fluids A;Dec91, Vol. 3 Issue 12, p2948 

    The influence of both a favorable and an adverse applied axial pressure gradient on microbubble-induced skin friction reduction was examined. An 87 mm diameter, 632 mm long model equipped with a 273 mm long cylindrical force balance was employed. Experiments were carried out in a 305 mm diameter...

  • No rise in compressor sales for two years.  // Professional Engineering;11/03/99, Vol. 12 Issue 20, p12 

    Predicts the continuation of the downward trend in compressor sales in Great Britain. Decline of engineering output in 1999; Anticipated rate of depression of demand for axial compressors.

  • Development of key components and technologies for a high repetition rate and high-power excimer laser Goto, Tatsumi; Takagi, Shigeyuki; Kakizaki, Kouji; Saton, Saburoh; Kosugi, Shinichiro; Ohishi, Takashi; Kanazawa, Yukio; Ishii, Akira; Teranishi, Tsuneharu; Yasuoka, Koichi; Shinohe, Takashi; Ohashi, Hiromichi; Endo, Fumihiko; Okamura, Katsuya // Review of Scientific Instruments;Jan1998, Vol. 69 Issue 1, p1 

    Develops the key components and technologies for a xenon chloride excimer laser. Fabrication of a compact axial blower; Creation of x-ray tube for laser preionization.

  • Inertial Manifolds and Gevrey Regularity for the Moore-Greitzer Model of an Axial-Flow Compressor. Chung, Y.; Titi, E. S. // Journal of Nonlinear Science;Jan/Feb2003, Vol. 13 Issue 1, p1 

    Studies inertial manifolds and Gevrey regularity for the Moore-Greitzer model of an axial-flow compressor. Global invariant inertial manifold in the system of evolution equations; Ordinary differential system; Reliability of the Galerkin method.

  • Expanded Triaxial Force.  // Product Design & Development;Jul/Aug2010, Vol. 65 Issue 6, p33 

    The article evaluates the 3-component triaxial force link with expanded measurement capabilities from Kistler Instrument Corp.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics