TITLE

Unified Series-Shunt Compensator for PQ Analysis using Dynamic Phasor Modeling and EMT Simulation

AUTHOR(S)
Hannan, M. A.; Mohamed, Azah; Hussain, Aini
PUB. DATE
June 2010
SOURCE
AIP Conference Proceedings;6/17/2010, Vol. 1247 Issue 1, p122
SOURCE TYPE
Conference Proceeding
DOC. TYPE
Article
ABSTRACT
Modeling of unified series-shunt compensator (USSC) and its PQ analysis of a simple test system is simulated based on dynamic phasor model and EMT program. Its aim is to investigate the overall efficiency of USSC for power quality (PQ) analysis and results will be compared with EMTP like simulation. The dynamic phasor model is implemented in Matlab/Simulink toolbox where as the EMT model simulation of the USSC uses the PSCAD/EMTDC software. Credible solutions to the PQ problems on the distribution network have been analyzed using dynamic phasor model and EMT model simulation techniques. Simulation results of the USSC dynamic phasor model including the system makes a perfect agreement with the detailed time-domain EMTP like PSCAD/EMTDC simulation. It is found that the dynamic behavior of USSC phasor model have very good potential application in analyzing overall PQ issues, faster in speed and higher accuracy as compared with PSCAD/EMTDC simulation.
ACCESSION #
51526886

 

Related Articles

  • DYNAMIC SIMULATIONS OF A PLANETARY CHAIN SPEED INCREASER FOR R.E.S. SAULESCU, Rathi; DIACONESCU, Dorin; JALIU, Codnita; VATASESCU, Monica // Annals of DAAAM & Proceedings;Jan2009, p661 

    The dynamic model of a planetary chain increaser used in small hydro is presented in this paper. The dynamical aspects presented in (Saulescu et al, 2009) represent the basics for the dynamic model presented in this paper. The dynamic response is obtained by means of Matlab-Simulink software.

  • Kinematical simulation of 3-DOF parallel mechanism based on ADAMS. Qi Xiaoyan; Wang Weiren; Dong Hao; Li Wei // Applied Mechanics & Materials;2014, Issue 630-642, p1315 

    Kinematics analysis of mechanism refers to analysis for pose, speed and acceleration of mobile platform of spatial 3-RPS parallel mechanism. In this paper, mathematical model of spatial 3-RPS parallel mechanism is primarily built, and the close loop equation is adopted for the positional posture...

  • BEYOND PLANT DESIGN. LePree, Joy // Chemical Engineering;Feb2010, Vol. 117 Issue 2, p19 

    The article discusses the significant impact of process simulation software on chemical process industries (CPI). According to the author, process simulation software has become popular among CPI that are faced with the global pressure of efficient operation. The software's application involve...

  • Research Concerning the Dynamic Analysis of Plane Mechanisms Structures. Bădoiu, Dorin // Petroleum - Gas University of Ploiesti Bulletin, Technical Serie;2009, Vol. 61 Issue 2, p29 

    In the paper a methodology for the analysis of plane mechanisms structures is presented. Positional, cinematic and dynamical stages are analyzed. With this end in view, a simulation program has been developed. Finally, some simulation results are presented. Some interesting 3D results regarding...

  • Modelling Society's Evolutionary Forces. Gooding, Tim // Journal of Artificial Societies & Social Simulation;Jun2014, Vol. 17 Issue 3, p6 

    If local circumstances can generate local social trends, it follows that global circumstances can generate global trends. Furthermore, modern global circumstances match the conditions used to create artificial evolutionary systems. If it is possible for evolutionary forces to arise in global...

  • Analysis and design of simulation system for passive acoustic senor network. Junhua Li; Hongwei Quan; Xiuyin Xue // Applied Mechanics & Materials;2014, Issue 533, p214 

    The simulation system for passive acoustic sensor network is an important part of information fusion system. Its main function is to simulate the detection process of acoustic sensor network and produce the simulation data which is needed for testing and evaluating the target tracking...

  • Origin-Destination Matrix As A Way To Create A Basic Algorithm For Simulation A Load Of Transport Network. Shevtsova, Anastasiya; Yablonovskaya, Marina; Borovskoy, Alexey // Applied Mechanics & Materials;2014, Vol. 740, p1218 

    Article is devoted to studying of traffic flows using the origin-destination matrix. The first paragraph of this article deals with the possibility of applying the origin-destination matrix when modeling load of transport network. The types of transportations, the factors that affect the loading...

  • Manage an EM Simulator without a Mortgage. BROWNE, JACK // Microwaves & RF;Nov2014, Vol. 53 Issue 11, p13 

    The article reflects on managing an electromagnetic (EM) simulator. It is said that electromagnetic (EM) modeling and simulation programs can predict high-frequency circuit performance based on solving the Maxwell's equations. It is also said that the cost of the more-sophisticated EM simulators...

  • Climbing characteristic of the wheeled vehicle with dual pump drive system. Chen Yanli; Hu Weiguo; Liu Jialin; Wang Hui; Wang Chunxue; Wu Xiaodong; Liu Shunan; Yang Luhong // Applied Mechanics & Materials;2014, Issue 535, p13 

    The configuration diagram of wheeled vehicle was presented and the mathematical model of the important components was built according to the working principle of system. The subsystem properties of wheeled vehicle have analyzed by means of simulation method. Moreover, the climbing characteristic...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics