TITLE

preface

AUTHOR(S)
Al-Mahaidi, Riadh
PUB. DATE
January 2011
SOURCE
Australian Journal of Structural Engineering;2011, Vol. 11 Issue 2, preceding p75
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The article discusses various reports published within the issue, including one by S.T. Smith and S.J. Kim on deflection calculation of fibre-reinforced polymers (FRP) strengthened reinforced concrete flexural members, one by A. Godat on numerical modelling of shear crack angles in FRP, and one by S. Hashemi, and R. Al-Mahaidi on bond strength and flexural behavior of FRP concrete beams.
ACCESSION #
56101958

 

Related Articles

  • AND THE WALLS DIDN'T COME TUMBLING DOWN. Tresilian, David // UNESCO Sources;Dec2000, Issue 129, p22 

    Clarifies the misconception that traditional masonry technique was unsafe compared to modern reinforced concrete, in structural engineering. Advantages offered by traditional building techniques in earthquake-prone areas; Overview on the special seismic properties of vernacular architecture;...

  • A non-linear steel-concrete interface damage model for reinforced concrete after cracking. Castel, A.; Gilbert, R. I.; Ranzi, G.; Foster, S. // Australian Journal of Structural Engineering;2014, Vol. 15 Issue 2, p221 

    In reinforced concrete construction, deflection control is an important performance criterion for its serviceability and sustainability. In this paper, a finite element model dedicated to the calculation of the overall stiffness of reinforced concrete beams is extended in order to take into...

  • Influence of Excitation on Dynamic System Identification for a Multi-Span Reinforced Concrete Bridge. Alwash, M.; Sparling, B. F.; Wegner, L. D. // Advances in Civil Engineering;2009, p1 

    In vibration-based damage detection, changes to structural modal properties are tracked over time in order to infer the current state of damage or deterioration. As such, the ability to obtain reliable estimates of modal parameters, particularly natural frequencies and mode shapes, is of...

  • Bearing capacity improvement of square footing by micropiles. Bhattacharjee, Arup; Mittal, Satyendra; Krishna, A. Murali // International Journal of Geotechnical Engineering;Jan2011, Vol. 5 Issue 1, p113 

    Micropiles are have been effectively used in many ground improvement applications to increase the bearing capacity and reduce settlement, particularly in strengthening existing foundations. This paper presents the results of laboratory model tests on the behavior of a square footing supported on...

  • Earthquake simulator tests and associated study of an 1/6-scale nine-story RC model. Sun Jingjiang; Wang Tao; Qi Hu // Earthquake Engineering & Engineering Vibration;Sep2007, Vol. 6 Issue 3, p281 

    Earthquake simulator tests of a 1/6-scale nine-story reinforced concrete frame-wall model are described in the paper. The test results and associated numerical simulation are summarized and discussed. Based on the test data, a relationship between maximum inter-story drift and damage state is...

  • ABSTRACTS.  // Australian Journal of Structural Engineering;2011, Vol. 11 Issue 2, p163 

    The article presents abstracts on structural engineering which include the deflection calculation of fibre-reinforced polymer (FRP) strengthened and reinforced concrete flexural members, numerical modeling of shear crack angles in FRP shear-strengthened and reinforced concrete beams, and the...

  • Justification of ACI 446 Code Provisions for Shear Design of Reinforced Concrete Beams. Bažant, Zdenek P.; Qiang Yu; Gerstle, Walter; Hanson, James; Ju, J. Woody // ACI Structural Journal;Sep/Oct2007, Vol. 104 Issue 5, p601 

    Due to a relatively large amount of experimental evidence and recent scientific advances, it is now generally recognized that, to ensure adequate safety margins, the size effect for designing reinforced concrete beams against shear failure must be incorporated into ACI code provisions. A purely...

  • NUMERICAL DEFORMATION ANALYSIS OF BRIDGE CONCRETE GIRDERS. Kaklauskas, Gintaris; Girdžius, Rokas; Bačinskas, Darius; Sokolov, Aleksandr // Baltic Journal of Road & Bridge Engineering (Baltic Journal of R;Jun2008, Vol. 3 Issue 2, p51 

    Present research was aiming at deriving tension stiffening relationship based on EC2 provisions for deformation analysis of bending RC structures. According to the algorithm proposed by the first author, a tension stiffening relationships were derived from moment-curvature diagrams of reinforced...

  • Behavior of Deep Beams with Short Longitudinal Bar Anchorages. Roy, Nathan C.; Breña, Sergio F. // ACI Structural Journal;Jul/Aug2008, Vol. 105 Issue 4, p460 

    This paper presents laboratory test results of 12 deep beams in which the longitudinal reinforcement was anchored into the support using short straight bar anchorages. Specimens were constructed using three different shear span-depth ratios (a/d). Differences in general and local behavior in the...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics