TITLE

Beyond the kitchen sink

AUTHOR(S)
Newman, Roger C.
PUB. DATE
February 2002
SOURCE
Nature;2/14/2002, Vol. 415 Issue 6873, p743
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Investigates the resistance of stainless steel to corrosion. Significance of chromium content in the transformation of the surface oxidation process in wet environments; Details of the pit formation process; Disadvantage of very low sulphur content.
ACCESSION #
6387362

 

Related Articles

  • Stainless steel rust riddle is finally solved.  // Professional Engineering;2/27/2002, Vol. 15 Issue 4, p65 

    Focuses on an investigation concerning the cause of rusting of stainless steel. Process of creating stainless steel; Effect of the sucking of chromium by impurity particles; Possibility of changing the process.

  • Dissolution of Chromium-Enriched Inclusions and Pitting Corrosion of Resulfurized Stainless Steels. Krawiec, H.; Vignal, V.; Heintz, O.; Oltra, R.; Chauveau, E. // Metallurgical & Materials Transactions. Part A;May2006, Vol. 37 Issue 5, p1541 

    The dissolution of MnS inclusions enriched in chromium (30 to 40 wt pct Cr) and the corrosion susceptibility of resulfurized stainless steel were studied in various NaCl- and NaClO4-based solutions by X-ray photoelectron spectroscopy, secondary ion mass spectroscopy, scanning electron microscopy...

  • Effect of Element Diffusion Through Metallic Networks During Oxidation of Type 321 Stainless Steel. Zeng, Z.; Natesan, K.; Cai, Z.; Gosztola, D.; Cook, R.; Hiller, J. // Journal of Materials Engineering & Performance;Apr2014, Vol. 23 Issue 4, p1247 

    A detailed study was conducted on localized oxidation on Type 321 stainless steel (321ss) using synchrotron x-ray nanobeam analysis along with Raman microscopy. The results showed the presence of metallic nanonetworks in the oxide scales, which plays an important role in the continued oxidation...

  • Efeito do revenido na resistência à corrosão dos aços inoxidáveis supermartensíticos. Camillo, Ana Paula Ciscato; DellaRovere, Carlos Alberto; de Aquino, José Mario; Kuri, Sebastião Elias // Rem: Revista Escola de Minas;Jan2010, Vol. 63 Issue 1, p117 

    Supermartensitic stainless steels have been used in the oil and gas industry for onshore and offshore tubing applications, due to their good mechanical properties, weldability and excellent corrosion resistance. They are hardened by quenching heat treatment, and to improve their toughness, are...

  • The Effect of Thermal Preoxidation on the Pitting Susceptibility of Steel X18H10T. Zimina, T. Yu.; Tselykh, O.G.; Oshe, E.K. // Protection of Metals;Nov/Dec2004, Vol. 40 Issue 6, p577 

    The effect of thermal preoxidation of a X18H10T stainless steel in air at temperatures of 100 to 775°C on its susceptibility to pitting is studied. It is shown that the pitting potential of steel depends on the number of defects in the preformed surface thermooxides. Oxidation at...

  • The Thickness Distribution of Oxidation Film on Tapered Pipe Surface in Dieless Drawing. Fang Qin; Xue-Feng Liu; Hao-En Mao // International Journal of Corrosion;2011, p1 

    The thickness distribution of oxidation film on the surface of AISI304 stainless steel tapered pipe, its influence factors, and the effect of metal matrix deformation on oxidation behavior during dieless drawing were studied in this paper. The results showed that oxidation rate was affected...

  • Corrosion Behaviour of Amorphous Niobium Oxide Coatings. Rojas, P. N.; Rodil, S. E. // International Journal of Electrochemical Science;Feb2012, Vol. 7 Issue 2, p1443 

    Niobium oxide films were evaluated as possible candidates for corrosion resistant biomedical coatings using electrochemical methods. The films were deposited on medical grade stainless steel using a reactive magnetron sputtering system starting from a pure Nb target. The long-term stability of...

  • Corrosion-Electrochemical behavior of 13% chromium (Cr) martensitic stainless steel in hydrochloric acid (HCl) solutions. Chermat-Aourasse, N.; Kesri, R. // Protection of Metals;Jul2007, Vol. 43 Issue 4, p344 

    Corrosion-Electrochemical behavior of a commercial API5CT grade L80 type 13Cr tubing enriched with microalloying elements is studied in 6, 7.5, 9, 12 and 15% HCl solutions by electrochemical methods. The objective is to contribute to the comprehension of corrosion phenomena caused by HCl of...

  • ASK THE GUN NUT. Petzal, David E. // Field & Stream;Apr2007, Vol. 111 Issue 11, p52 

    The article presents a question and answer related to the make of rifle barrels. A reader asks if there is any advantage in stainless-steel barrels as compared to other material. The reply suggests that the stainless steel employed in rifle barrels also rusts like chromium molybdenum steel, but...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics