TITLE

SINGLE PHASE NEUTRAL LINKED VIENNA RECTIFIER: A SOLUTION FOR THE MITIGATION OF VOLTAGE SAG IN ASD FED INDUCTION MOTOR

AUTHOR(S)
Selvaraj, A.; Paranjothi, S. R.; Jagadeesh, B.
PUB. DATE
July 2012
SOURCE
Journal of Engineering & Applied Sciences;Jul2012, Vol. 7 Issue 7, p885
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The two primary reasons for using an adjustable speed drive (ASD) in industry are Process control and Energy conservation. However, voltage sags are the most important power quality problem facing many commercial and industrial customers. Voltage sag problem arise because of transients in supply voltage by the usage of heavy inductive loads. Therefore to improve the performance of the motor and drive, new controlling drives has to be implemented with the help of power electronics. The ride-through capability of the induction motor during voltage sag is taken into account that duration of the ride-through operation depends on the initial motor flux, speed level, rotor time constant, load torque and inertia. Also Inverter design mainly affects the motor performance. A new combination technique has been proposed for the mitigation of voltage sag on adjustable speed drive. Simulation results are illustrated for the proposed techniques. The simulation results are compared with the circuit in the combination of diode rectifier and normal inverter. It is highlighted that the waveform generated by the new technique is efficient with the reduction of the effect of voltage sag.
ACCESSION #
80415844

 

Related Articles

  • Voltage Sag Mitigation on ASD.  // International Journal of Engineering Science & Technology;2011, Vol. 3 Issue 2, p1339 

    The article reports on the new technique proposed for the mitigation of voltage sag on adjustable speed drive (ASD). It states the technique is compared with the normal inverter along with diode rectifier. Simulation results when compared without Vienna rectifier with the circuit in the...

  • Variable Frequency Drives.  // Chemical Engineering;Sep2015, Vol. 122 Issue 9, p42 

    The article focuses on variable frequency drives (VFD) in electric motor systems. It discusses components of a VFD including a rectifier, intermediate circuit, inverter and control unit. It explores improvements in the use of VFD in processes such as speed control, flow control, pressure control...

  • HARMONICS ANALYZER IN LABVIEW. Anton, Florin Daniel; Iatan, Alexandru Mircea // Mathematical Modeling in Civil Engineering;Dec2011, Issue 4, p7 

    Nowadays, power electronics are widely used for supplying loads with amplitude and frequency controlled voltage. These systems comprise mainly rectifiers and inverters which, as non-linear loads, produce currents with high harmonic content. Depending on the nature of these loads, the distortion...

  • DEVELOPMENT OF A COMPACT THREE-PHASE INDUCTION MOTOR DRIVE SYSTEM WITH DISCRETE COMPONENTS. Lee, Shiyoung // International Journal of Engineering Research & Innovation;Spring/Summer2011, Vol. 3 Issue 1, p42 

    Growth in the high-volume market in variable-speed drives (VSDs) is expected due to emerging applications in both home appliances and process industries. VSDs greatly improve efficiency in those applications. Almost all of these applications do not require precise positioning or speed control...

  • HARMONIC ANALYSIS OF INDUCTION MOTOR DRIVE USING NEURAL NETWORK. MENGHAL, P. M.; A. JAYA LAXMI // Journal on Electrical Engineering;Jul-Sep2013, Vol. 7 Issue 1, p20 

    In Industries, because of its good self-starting capability, simple and rugged structure, low cost and reliability etc. more than 85 % of the motors are Induction Motors. By varying the stator frequency over a wide range, 3-phase squirrel cage Induction Motors can be used in variable frequency...

  • Inverters rev up small-motor drives. Marsh, David // EDN;05/11/2000, Vol. 45 Issue 10, p107 

    Focuses on design of small-motor-application inverters. Popularity of variable-speed drives for low-power applications in the home and for the light industry; Influence of motor construction on inverter design; Bipolar devices in low-power inverters; Ability of power-device process-technology...

  • PERFORMANCE EVALUATION OF THREE-PHASE INDUCTION MOTOR DRIVE FED FROM Z-SOURCE INVERTER. Singh, Bindeshwar; Singh, S. P.; Singh, J.; Naim, Mohd. // International Journal on Computer Science & Engineering;2011, Vol. 3 Issue 3, p1277 

    This paper presents a Z-source inverter which has been proposed as an alternative power conversion concept for adjustable speed AC drives. It is having both voltages buck and boost capabilities as they allow inverters to be operated in the shoot through state. It utilizes an exclusive Z-source...

  • Using the real-time simulator for prototyping power electronics inverter. BASZYNSKI, MARCIN; SZLOSEK, MARCIN // Archives of Electrical Engineering;2018, Vol. 67 Issue 2, p447 

    This paper deals with real-time (RT) simulators applied in power electronic applications and implemented in a real inverter. The process of preparing and starting up an active rectifier prototype (with an active filter function), using the real-time OPAL RT simulator is given. The control system...

  • Examining adjustable speed drives. Foszcz, Joseph L. // Plant Engineering;Jun2000, Vol. 54 Issue 6, p109 

    Focuses on the applications of adjustable speed drives (ASD). Basic ASD components; ASD classifications; Common approach to process control. INSETS: Typical ASD starting conditions;Questions to ask when applying ASDs.

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics