TITLE

Renewable Energy Drives Lab Gas Generation

AUTHOR(S)
Speranza, John
PUB. DATE
March 2013
SOURCE
Laboratory Equipment;Mar2013 Supplement, p17
SOURCE TYPE
Periodical
DOC. TYPE
Article
ABSTRACT
The article focuses on the technological innovations in renewable energy which influences the use of hydrogen gas generators at scientific laboratories in the U.S. The use of Proton exchange membrane (PEM) fuel cells and hydrogen generations in various renewable energy initiatives is highlighted. An outlook on the use of PEM electrolyzers to power fuel cell vehicles is provided.
ACCESSION #
85885881

 

Related Articles

  • PEM Fuel Cells for Energy Production in Solar Hydrogen Systems. Panayiotou, Gregoris P.; Kalogirou, Soteris A.; Tassou, Savvas A. // Recent Patents on Mechanical Engineering;Nov2010, Vol. 3 Issue 3, p226 

    The main barrier for the widespread use of Renewable Energy Sources (RES) systems is their variability and dependence on environmental conditions. Due to this problem the aspect of energy storage becomes more and more important and the prospect of using hydrogen as an energy carrier in order to...

  • PEMFC Application in a Gliding Arc Plasam-Catalysis Reforming System Using Biogas. Mun Sup Lim; Young Nam Chun // Energy & Power Engineering;May2011, Vol. 3 Issue 2, p158 

    In this study, bio-waste gas is converted to sustainable hydrogen energy in good quality and low pollution. In addition, generated highly concentrated hydrogen is applied to fuel cell (PEMFC) to resolve environmental and energy crisis issue via gliding arc plasma system. Parameters that can...

  • A Novel PWM Hybrid Multilevel Inverter for Fuel Cell Applications. Thamizhselvan, T.; Seyezhai, R. // International Journal of Computer Applications;Nov2011, Vol. 33, p33 

    Fuel cells are electrochemical devices that convert the chemical energy of a reaction directly into electrical energy and it is a clean energy source. Among the several types of fuel cell, Proton Exchange Membrane Fuel Cell (PEMFC) is a suitable choice for distributed energy sources. In this...

  • Zeolite Proton Conducting Membrane for Micro Fuel Cell Applications. Wei Han; Siu Ming Kwan; King Lun Yeung // Topics in Catalysis;Nov2010, Vol. 53 Issue 19/20, p1394 

    Supported and self-supporting ZSM-5 membranes (Si/Al = 25) were prepared, assembled and tested for hydrogen fuel cell performance. A Grotthus-like mechanism is proposed for the proton conduction in hydrated zeolites, where the protons hop between neighbouring aluminium sites along a water bridge...

  • Synthesis of Trimethyl Borate: as a Starting Material in Production of Sodium Borohydride (NaBH4) Hydrogen Storage Medium. Yilmaz, M. Sari; Piskin, S. // International Review of Chemical Engineering - Rapid Communicati;Mar2010, Vol. 2 Issue 2, p319 

    Continues decrease in quantity of the fossil fuel and undesired environmental effects by their usage in energy production made it compulsory going towards to newer and clearer energy production resources. When hydrogen was compared to the recent systems in aspects of cost, environmental effects...

  • CONVENTIONAL ETHANOL REFORMING TECHNOLOGY DEVELOPMENTS FOR THE PRODUCTION OF HYDROGEN. Tayade, Prashant; Sapkal, Vilas; Rode, Chandrasekhar; Sapkal, Rajendra // International Journal of Advances in Engineering & Technology;Mar2012, Vol. 3 Issue 1, p436 

    In the unsafe horizon of pollution, global warming, and energy crises, all resulted owing to the fossil fuels, hydrogen fuel obtained by steam reforming of bio-derived ethanol (bioethanol), can be a strong candidate as a clean energy carrier based on the renewable sources of energy. In this...

  • Simulation of Dynamic Response of Small Wind-Photovoltaic-Fuel Cell Hybrid Energy System. Esmaeili, Saeid; Shafiee, Mehdi // Smart Grid & Renewable Energy;Aug2012, Vol. 3 Issue 3, p194 

    Renewable energy systems are of importance as being modular, nature-friendly and domestic. Among renewable energy systems, a great deal of research has been conducted especially on photovoltaic effect, wind energy and fuel cell in the recent years. This paper describes dynamic modeling and...

  • Design and Implementation of an Interleaved Boost DC-DC Converter for PEM Fuel Cells. Sakda Somkun; Chatchai Sirisamphanwong; Sukruedee Sukchai // Applied Mechanics & Materials;2014, Issue 666, p87 

    This paper elaborates a design and implementation of a 2-phase interleaved boost DC-DC converter as the power conditioning circuit for PEM fuel cells. The converter ripple current is analyzed so as to determine the inductance value, which would draw the fuel cell ripple current less than 4 % of...

  • Efficient polymer solar cells employing a non-conjugated small-molecule electrolyte. Ouyang, Xinhua; Peng, Ruixiang; Ai, Ling; Zhang, Xingye; Ge, Ziyi // Nature Photonics;Aug2015, Vol. 9 Issue 8, p520 

    Polymer solar cells have drawn a great deal of attention due to the attractiveness of their use in renewable energy sources that are potentially lightweight and low in cost. Recently, numerous significant research efforts have resulted in polymer solar cells with power conversion efficiencies in...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics