TITLE

SENSORLESS START-UP OF TRACTION SWITCHED RELUCTANCE MOTORS OF THE RAILWAY ROLLING STOCK

AUTHOR(S)
TCHAVYCHALOV, Maxim
PUB. DATE
April 2013
SOURCE
Transport Problems: an International Scientific Journal;2013, Vol. 8 Issue 2, p121
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
The problem of SRM sensorless start is described. The new algorithm of traction switched reluctance motor sensorless start-up in a course is adduced. Results of physical modeling of the described method are given.
ACCESSION #
90613815

 

Related Articles

  • Design and Control of Disc PMSM Directly Driven Wheel for Tramcar. Zhenggang Lu; Xiaojie Sun; Jin Zhang // Advances in Mechanical Engineering (Hindawi Publishing Corporati;2014, p1 

    A new solution of disc permanent magnet synchronous motor (PMSM) directly driven wheel is proposed as a design customized for low floor tramcar. And the motors are overhung on the bogie frame to make the weight as the sprung mass. Meanwhile, the universal coupling is installed between the driven...

  • Current sensorless drive method for electric power steering. Lee, J.; Moon, H.; Yoo, J. // International Journal of Automotive Technology;Dec2012, Vol. 13 Issue 7, p1141 

    This paper proposes a current sensorless drive method by using the mathematical modeling of a surface-mounted permanent magnet synchronous motor (SPMSM) and a dead-time compensation method to reduce the calculated current error caused by differences between real output voltages and voltage...

  • Position Sensorless Torque Estimation of Synchronous Reluctance Motors Based on Extended-Flux Model without Core-Loss Measurement. Hasegawa, Masaru; Kitahara, Hiroki; Matsumoto, Atsushi // Journal of Energy & Power Engineering;Sep2012, Vol. 6 Issue 9, p1480 

    This paper proposes an extended-flux model with core-loss resistance of SynRMs (synchronous reluctance motors) and precise torque estimation without core-loss measurement and position encoder. The proposed torque estimation is useful for precise MTPA (maximum torque per ampere) control of...

  • Sensorless Control of Switched Reluctance Motors Based on Pulse Injection, Position Sectors Divided and Variable Thresholds. Zifei Jia; Dean Zhao; Yuyan Zhao // Advanced Materials Research;7/24/2014, Vol. 989-994, p3252 

    To realize starting operation and reduce position estimation error of switched reluctance motor(SRM) without position sensor, a novel control method based on pulse injection, divided angle section and variable threshold is presented. The starting operation of SRM can be accomplished by injecting...

  • A Comparative Analysis of the Effects of Rotor Molding Clinches on Torque Ripple of Mutually Coupled SRMS. Sahin, C.; Amac, A. E.; Karacor, M.; Emadi, A. // International Review of Electrical Engineering;Jul/Aug2011 Part A, Vol. 6 Issue 4, p1627 

    In this study, the mitigation of torque ripples at mutually coupled switched reluctance motor (MCSRM) is investigated experimentally. Although, MCSRMs have higher performance than classical switched reluctance machines (SRMs), they are not attractive enough due to their high torque ripples....

  • Finite Element Analysis of Switched Reluctance Motor be Control of Firing Angles for Torque Ripple Minimization. Jahangiri, T.; Feyzi, M. R.; Sharifian, M. B. B. // Journal of Applied Sciences Research;Sep2011, Vol. 7 Issue 9, p1391 

    In this paper, control of Switched Reluctance Motor by control of firing angles and the effect of variations of stator pole arc for Torque Ripple Reduction is reviewed. Steady state dynamic characterizations of basic switched reluctance motor 6/4 are calculated for three different sizes of...

  • Static Characteristics of Switched Reluctance Motor 6/4 By Finite Element Analysis. Jahan, T.; Sharifian, M. B. B.; Feyzi, M. R. // Journal of Applied Sciences Research;Sep2011, Vol. 7 Issue 9, p1403 

    In this paper, processing the static modeling of Switched Reluctance Motor 6/4 with three different stator pole arcs sizes are described. The result of static analysis, including inductance, flux linkage, and static torque vs. rotor position for various current excitations by considering...

  • Optimal design of switched reluctance motor using two-dimensional finite element method. Kim, Youn-Hyun; Choi, Jae-Hak; Jung, Sung-In; Chun, Yon-Do; Kim, Sol; Lee, Ju; Chu, Min-Sik; Hong, Kyung-Jin; Choi, Dong-Hoon // Journal of Applied Physics;5/15/2002 Part 1, 2 & 3, Vol. 91 Issue 10, p6967 

    Switched reluctance motor (SRM) has some advantages such as low cost, high torque density, etc., but SRM has essentially high torque ripple due to its salient structure. To apply SRM to the industrial field, we have to minimize torque ripple, which is the weak point of SRM. This article...

  • Simulation Reach of Permanent Magnet Synchronous Motor System Based on Speed Sensor-less Direct Torque Control. Meng-yuan Chen; Yue-dong Chen // Applied Mechanics & Materials;2014, Issue 643, p32 

    The simulation model of permanent magnet synchronous motor system based on speed sensor-less direct torque control is built by analysing the mathematic model of permanent magnet synchronous motor and the theory of direct torque control in this dissertation, and the system's speed and position is...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics