Research of Halbach Array's Influence on Permanent Magnet Synchronous Motor's Performance

Zhang Haoming; Li Hong; PEH Lian Soon
September 2014
Applied Mechanics & Materials;2014, Issue 651-653, p808
Academic Journal
The present motors are required to high speed, high efficiency, high power density but low pulsating torque. Traditonal rare-earth permanent magnet motor shows its defect; Halbach Array is a new type of permanent magnet structure: magnet field presents unilateral with the sinusoidal distribution. The structure makes the magnetic density of motor's air gap larger relatively while the magnetic density of rotor's yoke smaller. And it can help to reduce the motor's pulsating torque and its size, as well as to raise the power density of motor. The result of finite element analysis based on ANSYS shows that the above structure is able to decrease the mass of motor, to widen the width of air gap and obviously to improve the multi properties of motors.


Related Articles

  • Rusted but not Busted PART 3. AGUILAR, KEVIN // Street Trucks;Jan2015, Vol. 17 Issue 1, p82 

    The article offers step by step instruction for making and installing custom calibrated torque converter.

  • Main Aspects Regarding the Screw-on Torque Diminishing when Using the Fine Pitch Screw. Creiţaru, Adrian // Petroleum - Gas University of Ploiesti Bulletin, Technical Serie;2012, Vol. 64 Issue 2, p71 

    Romanian special standards - according to international (ISO) ones - show metric threads of common use for this kind of screw elements (bolts, nuts); there are a lot of standardized and un-standardized variants and also for any mechanical threaded pieces. In usual practice, the threads are...

  • Study on the Static Load Capacity and Synthetic Vector Direct Torque Control of Brushless Doubly Fed Machines. Chaoying Xia; Xiaoxin Hou // Energies (19961073);Nov2016, Vol. 9 Issue 11, p966 

    Compared to the doubly fed machine, the brushless doubly fed machine (BDFM) has high reliability and low maintenance requirements. First, by taking the negative conjugation of the control motor variables in rotor reference frame, a state-space model of BDFM is derived. It is then transformed...

  • Torquesense. Crosse, Jesse // Automotive Engineer;Dec2007, Vol. 32 Issue 11, p22 

    The article evaluates the torque converter.

  • Low-Speed Hydraulic Pump as a Tool for Setting and Measuring Torque. BANAŚ, Michał // Solid State Phenomena;2014, Vol. 220-221, p969 

    The paper presents a low-speed hydraulic pump which is used in a hydraulic load unit for testing mechanical devices. The control system of the unit reduces an impact of any other hydraulic and mechanical parameters, including temperature and rotational speed, on the torque. The hydraulic load...

  • A direct torque control driven vessel actuator device. Huilue Jiang; Bo Liu; Chuandao Liu // Applied Mechanics & Materials;2014, Issue 651-653, p593 

    Actuator is one of the most important auxiliary mechanisms used to control the ship heading. Focused on the existed shortages of conventional hydraulic driven vessel actuator as complex structure, low efficiency and response etc, by the analysis of torque variation to access the impact of direct...

  • 5MW Offshore Wind Turbine Control Based on Pitch Joint Torque Controller. Xingjia Yao; Hongfang Xie; Jiangsheng Zhu; Xiaodong Wang; Yingming Liu; Huaiqing Li // Applied Mechanics & Materials;2014, Issue 667-679, p185 

    Modern control theory has been used to design a variable pitch controller based on disturbance accommodating. The controller realizes the optimal control which minimized the controller action and drive-train torque. A torque controller based on pole clustering had been designed to enhance drive...

  • Torque Ripple Minimization of 4 Phase 8/6 Switched Reluctance Motor Drive with Direct Instantaneous Torque Control. Srinivas, P.; Prasad, P. V. N. // International Journal on Electrical Engineering & Informatics;Dec2011, Vol. 3 Issue 4, p488 

    The switched reluctance motor drives has evolved as an alternative to conventional motors in variable speed drives because of advantages like simple and rugged structure, absence of rotor winding, adaptability to harsh environments like coal mining, high speed operation etc. Because of...

  • Improvement in Hydrodynamic Torque Converter Design Process. Kesy, A.; Kesy, Z.; Jackson, M. R.; Parkin, R. M. // International Review of Mechanical Engineering;Jul2008, Vol. 2 Issue 4, p592 

    This paper describes the design process of hydrodynamic torque converter components for modern transmission systems. The design process was divided into two steps: virtual design process i.e. numerical calculation and geometric model creation and physical realization i.e. prototype of components...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics