A Research and Analysis on Equivalent Circuit Model of Lead-acid Batteries of Armored Vehicles

LI Kuang-cheng; LIU Yan; LIU Zheng; YANG Huai-bin
September 2014
Applied Mechanics & Materials;2014, Issue 654, p119
Academic Journal
To analyze the operation of the lead-acid battery of armored vehicles and facilitate the measurement of the state parameters, we need to see the lead-acid battery as a plurality of ideal components and establish the corresponding equivalent circuit model and characterize it. This paper describes several equivalent circuit models of commonly used lead-acid batteries, on this basis, we give the equivalent circuit model of lead-acid batteries of armored vehicles, and to analyze the variables of equivalent circuits.


Related Articles

  • Thermal runaway of valve-regulated lead-acid batteries. Junmei Hu; Yonglang Guo; Xuechou Zhou // Journal of Applied Electrochemistry;Oct2006, Vol. 36 Issue 10, p1083 

    Valve-regulated lead-acid (VRLA) batteries that have aged on a float charge at constant voltage occasionally suffer from thermal runaway. Operating conditions for a VRLA battery have been simulated by changing the electrolyte saturation level in the separator and the ambient temperature. The...

  • Lead-acid storage battery recovery system using on--off constant current charge and short--large discharge pulses. Mizumoto, I.; Yoshii, Y.; Yamamoto, K.; Oguma, H. // Electronics Letters;6/14/2018, Vol. 54 Issue 12, p777 

    We report a method of recovering degraded lead-acid batteries using an on--off constant current charge and short--large discharge pulse method. When the increases in inner impedance are within ~20% of the initial impedance value, their system will permit discharge times to recover to a level...

  • It's nearly winter - are your batteries ready? ROBERTS, JACK // Commercial Carrier Journal;Oct2015, Vol. 172 Issue 10, p32 

    The article offers information on how to conduct a proper battery testing for maintenance considering the winter season, according to engineering and technical service manager Gale Kimbrough. Topics include the calculation of the batteries cold cracking amperes (CCA) capacity considering its...

  • Research on VSC-HVDC based on modular multilevel converter technique. Siyu Chen; Yalou Li; Xiaobo Hu; Li Zhao; Chaoxi Chen // Applied Mechanics & Materials;2014, Issue 577, p588 

    This paper introduces the topology and working principle of modular multilevel converter, simplifying its equivalent circuit before obtaining virtual equipotential. On the ground of the theoretical model of equivalent circuit, MMC-HVDC could adapt the same control strategy as the traditional...

  • Characteristics Analysis and Simulation of Self-Excited Single-Phase Induction Generator. Wen-Yeau Chang // Applied Mechanics & Materials;2014, Issue 577, p474 

    This paper presents steady-state characteristics analysis of a self-excited single-phase induction generator (SPIG) which supplies an isolated load. The self regulated characteristics of a SPIG by connecting external capacitors are examined. The system consisting of both shunt and series...

  • Some questions about equivalent circuit synthesis and nonlinear electrical circuit implementation with the specified properties in the electronic simulation tasks. Pivnev, Vitaly Viktorovich; Basan, Sergey Nikolaevich // Applied Mechanics & Materials;2014, Issue 670-671, p1454 

    In this paper we consider the problem of synthesis of equivalent circuits containing nonlinear electrical circuits, in general, any number of non-linear elements. The system of differential equations describing the linear non autonomous multi-pole after quasi equivalence transformations allows...

  • Application Research of WNN Optimized by GA in VRLA Battary Degradation Prediction. Suaifeng Wang; Chang Li; Xiaoqing Xie; Jun Wang // Applied Mechanics & Materials;2014, Issue 644-650, p2087 

    This paper studies the accurate prediction problem of VRLA battery state of charge (SOC) and the remaining capability of the battery, after the comprehensive analysis of the various elements which affect the battery state of charge, we put forward a battery degradation test model based on GA -...

  • What is in a battery?  // European Power News;Feb99, Vol. 24 Issue 2, p23 

    Provides information on various aspects of lead-acid batteries. Electric potential of each cell; Basic applications; Tips in choosing correct size of battery; Overcharge; Sulphation/undercharge; Service life; Recommended normal operating temperature.

  • Boost battery life with soft-start. Serdarevic, Emir // Electronics Weekly;11/4/2009, Issue 2405, p16 

    The article presents information on how soft-start circuitry helps in extending battery life. In a battery-powered product, when power to a circuit is first applied, it takes some time to establish stable operating conditions and during this time, high peak currents are encountered. It results...


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics