TITLE

Recent Developments in the Field of Shape Memory Epoxy Foams

AUTHOR(S)
Loredana Santo
PUB. DATE
April 2014
SOURCE
Materials Science Forum;2014, Vol. 783-786, p2523
SOURCE TYPE
Academic Journal
DOC. TYPE
Article
ABSTRACT
Shape memory epoxy foams are a new class of materials for aerospace applications as light actuators, structural parts with reduced size during transport, and expandable/deployable structures. They were tested in an experiment onboard of the International Space Station in May 2011 (Shuttle Mission STS 134) and in April 2013, on board the BION-M1 capsule through the Soyuz-2 launch vehicle, with the aim to study the behavior in microgravity for future applications. The experiments were performed by an autonomous device which was in turn composed of control and heating system, battery pack and data acquisition system. Micro-gravity does not affect the ability of the foams to recover their shape but it poses limits for the heating system design because of the difference in heat transfer on earth and on orbit. This could be very significant for the behaviour of complex multi-functional structures in which shape memory epoxy foams are integrated. In this work, the main results of the experiments in microgravity are discussed and some results of tests on ground are shown in order to evaluate new possible developments in the field.
ACCESSION #
99492440

 

Related Articles

  • Polymer matrix composites with shape memory properties. QUADRINI Fabrizio // Materials Science Forum;2014, Vol. 783-786, p2509 

    Shape memory composites and structures were produced by using carbon fiber reinforced prepregs and a shape memory epoxy resin. The matrix of the prepregs was an epoxy resin as well but without remarkable shape memory properties. This way, two different technical solutions were adopted. Shape...

  • Three-way actuation of shape memory composite. Tobushi, H.; Hayashi, S.; Pieczyska, E.; Date, K.; Nishimura, Y. // Archives of Mechanics;2011, Vol. 63 Issue 5/6, p443 

    The SMC belt composed of two kinds of SMAs with different phase transformation temperatures and SMP, was fabricated and the three-way (reciprocating) movement and recovery force in bending actuation were investigated. The results obtained can be summarized as follows. 1) The three-way bending...

  • An investigation of a thermally steerable electroactive polymer/shape memory polymer hybrid actuator. Ren, Kailiang; Bortolin, Robert S.; Zhang, Q. M. // Applied Physics Letters;2/8/2016, Vol. 108 Issue 6, p1 

    This paper investigates the thermal response of a hybrid actuator composed of an electroactive polymer (EAP) and a shape memory polymer (SMP). This study introduces the concept of using the large strain from a phase transition (ferroelectric to paraelectric phase) induced by temperature change...

  • So that's how Uri Geller does it!  // Design Engineering;Nov2001, p9 

    Focuses on the use of shape memory alloys in actuator applications in the United States. Changes in the alloy's shape when exposed to a magnetic field; Citations on the magnetic fields used in actuation; Usefulness of the actuation process in take-off and landing flaps on aircraft wings.

  • Shape-memory motor. Lewis, John // Design News;3/11/2002, Vol. 58 Issue 5, p62 

    Presents information on the NanoMuscle Actuator from NanoMuscle Inc. which use the properties of shape-memory alloys to produce movement. Advantages of the actuator; Discussion on how the device works.

  • Miniature actuator driven photothermally using a shape-memory alloy. Inaba, S.; Hane, K. // Review of Scientific Instruments;Jun93, Vol. 64 Issue 6, p1633 

    A miniature actuator, in which a shape-memory alloy is driven photothermally by a laser diode, is described. The force of 9.8 mN and the displacement of 58 µm were obtained by irradiation with a laser power of 10 mW for the shape-memory alloy. The cutoff frequency for the vibration amplitude...

  • Fullerene Embedded Shape Memory Nanolens Array. Sohee Jeon; Jun Young Jang; Jae Ryoun Youn; Jun-ho Jeong; Brenner, Howard; Young Seok Song // Scientific Reports;11/22/2013, p1 

    Securing fragile nanostructures against external impact is indispensable for offering sufficiently long lifetime in service to nanoengineering products, especially when coming in contact with other substances. Indeed, this problem still remains a challenging task, which may be resolved with the...

  • Recovery torque modeling of carbon fiber reinforced shape memory polymer nanocomposites. Shen, He; Xu, Yunjun; Liang, Fei; Gou, Jihua; Mabbott, Bob // Applied Physics Letters;11/11/2013, Vol. 103 Issue 20, p201903 

    Carbon fiber and carbon nanofiber paper (CF&CNFP) can be incorporated into shape memory polymers (SMPs) to increase electrical conductivity and allow high speed electrical actuation with a low power. This paper studies the interactions among the recovery torques of CF&CNFP and SMP and the...

  • X-ray diffraction studies on Ti-Pd shape memory alloys. Arockiakumar, R.; Takahashi, M.; Takahashi, S.; Yoko Yamabe-Mitarai // Materials Science Forum;2014, Vol. 783-786, p2517 

    The phase transformation behavior of Ti-50Pd-5x (x =Zr, Hf, V, Nb, Ta, Cr, Mo, W) (at.%) alloys was studied by X-ray diffraction measurements from room temperature to 800 °C. In all the alloys, B19 martensite was observed at room temperature and it transformed to B2 phase upon heating. In...

Share

Read the Article

Courtesy of THE LIBRARY OF VIRGINIA

Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics