Production of Continuous-Cast Semifinished Products Made of Pipe Steels Alloyed with Rare-Earth Metals

Toporov, V.; Stepanov, A.; Murzin, A.; Zhitlukhin, E.; Dresvyankina, L.; Meling, V.; Pashchenko, S.; Radchenko, Yu.; Onishchuk, V.
November 2014
Metallurgist;Nov2014, Vol. 58 Issue 7/8, p595
Academic Journal
The Severskii Pipe Plant has developed a technology for obtaining continuous-cast semifinished products made of pipe steels alloyed with cerium. Use of the technology makes it possible to homogeneously distribute the REM over the volume of the steel and give it satisfactory castability on continuous casters operating in the automatic regime. Up to 900 tons of liquid steel can be cast in a single series with the use of this technology.


Related Articles

  • INFLUENCE OF THE OXIDATION STATE OF Ce-IONS ON THE INHIBITION OF AA2024 ALLOY CORROSION IN A MODEL CORROSIVE MEDIUM. Pernas, J. E.; Kozhukharov, S.; Matter, E.; Salve, A. A.; Machkova, M. // Journal of the University of Chemical Technology & Metallurgy;Sep2012, Vol. 47 Issue 3, p311 

    Nowadays large variety of lanthanides, and especially cerium compounds are the object of intensive investigations, as potential corrosion inhibitors for various metallic alloys. Additionally, the electrochemical measurement techniques have proven to be the most appropriate for elucidation of the...

  • Influence of Si and REE on the Corrosion Resistance of ZnAl40Cu3 Alloy. Michalik, Rafał // Solid State Phenomena;2014, Vol. 212, p133 

    The corrosion resistance of ZnAl40Cu3 alloy are presented in the paper. Base alloy, alloy with silicon and alloy with silicon and rare earth elements were tested. The scope of the examination included: potentiodynamic and potentiostatic examinations, studies of the alloy surface condition after...

  • Nanotechnology for Cast Products.  // Foundry Management & Technology;Feb2012, Vol. 140 Issue 2, p12 

    The article reports on the development of a method by the researchers at the University of Bayreuth and Max Planck Institute of Colloids and Interfaces to establish a corrosion-inhibiting barrier on the surface of a casting using sound waves to deposit capsules of a corrosion-inhibiting material.

  • Deposition, Characterization and Electrochemical Properties of Permanganate-Based Coating Treatments Over ZE41 Mg-Zn-Rare Earth Alloy. Hamdy, Abdel Salam; Hussien, H. M. // International Journal of Electrochemical Science;Sep2013, Vol. 8 Issue 9, p11386 

    Rare-earth ZE41 alloy possesses unique mechanical properties. However, the sharp potential difference between the rare-earth phases (cathode) inside the Mg matrix (anode) results in building up micro-electrochemical cells and enhancing galvanic corrosion. In chloride solution, the galvanic...

  • Lanthanides as environmentally friendly corrosion inhibitors of iron in 3.5% NaCl solution. Fouda, A. S.; Megahed, H.; Ead, D. M. // Desalination & Water Treatment;Apr2013, Vol. 51 Issue 16-18, p3164 

    Lanthanides have been evaluated as new corrosion inhibitors for the corrosion of iron in 3.5% NaCl solutions using electrochemical techniques [potentiodynamic polarization, electrochemical impedance spectroscopy, and electrochemical frequency modulation]. The adsorption of lanthanides on iron...

  • Corrosion-resistant-rare-earth–transition-metal amorphous films with high recording sensitivity for magneto-optical disks. Kawamoto, A.; Nagato, K.; Kuzuo, R.; Yorozu, T. // Journal of Applied Physics;4/15/1988, Vol. 63 Issue 8, p3853 

    Presents a study that provided a method for improving the corrosion resistance of rare-earth-transition-metal (RE-TM) films for magneto-optical recording without depressing the recording sensitivity. Characteristics of RE-TM films; Procedures for preparing amorphous films; Mechanism of...

  • The Thickness Distribution of Oxidation Film on Tapered Pipe Surface in Dieless Drawing. Fang Qin; Xue-Feng Liu; Hao-En Mao // International Journal of Corrosion;2011, p1 

    The thickness distribution of oxidation film on the surface of AISI304 stainless steel tapered pipe, its influence factors, and the effect of metal matrix deformation on oxidation behavior during dieless drawing were studied in this paper. The results showed that oxidation rate was affected...

  • Guidelines to control MIC in new buried steel pipeline construction. Manion, Leon // Pipeline & Gas Journal;Oct98, Vol. 225 Issue 10, p30 

    Defines the measures necessary to control microbiologically influenced corrosion (MIC) in new buried steel pipeline construction that is in a high risk category for this type of attack. Metabolic cycle of sulfate reducing bacteria; Importance of understanding the behavior of micro-organisms in...

  • Effects of Hydrogen on the Corrosion Failure of Welded Pipelines. Makarenko, V.; Khalin, A. // Chemical & Petroleum Engineering;Jul/Aug2005, Vol. 41 Issue 7/8, p448 

    Test data are presented for specimens of steels 20, 09G2S, and 14Kh2GMR provided by a method corresponding to the standard NACE TM-01-77. It is found that the work of failure as a time function is related to the hydrogenation volume.


Read the Article


Sorry, but this item is not currently available from your library.

Try another library?
Sign out of this library

Other Topics